CBSPD Test 4 Exam Edge Practice Questions and Answers

Chemical indicators that are used to test the humidity, temperature, sterilant or a variety of parameters of the sterilization process are called? Chemical Integrators. There are four primary objectives for all packaging materials. Each of the following is one of them EXCEPT? They must not allow penetration of the chosen sterilant and must be compatible with any other requirements of the sterilization process. Lighting in the decontamination area should be adequate for detailed cleaning and inspection. All of the following are factors that lighting be based EXCEPT? The same wattage of lighting throughout. Brushing should be done underwater and by? Following the grain. Prohibiting recapping needles with a two- handed technique is an example of which of the following? Work Practice controls. The removal of contamination from a surface to the extent necessary for further processing for intended use is? Cleaning. A piece of patient equipment is returned in a nonfunctioning condition. This piece of equipment should be? Tagged for repair. The internal path through a needle is known as which of the following? Ideally, which type of wetting agent should be utilized as a free rinsing agent to minimize the deposit of minerals that appear as water spots when dry? De-ionized water. In terms of patient care equipment which of the following would be an appropriate safety tip? Cover contaminated equipment that is being transported to the Central Service Department for processing.