BICSI Technician Installer 1 Review Study Guide Exam Q&A 2024

BICSI Technician Installer 1 Review Study Guide Exam Q&A 2024 B - CORRECT ANSWER-A third 90-degree bend may be permitted in a conduit run if the run does NOT exceed ______? A 5 m (16.5') B 10 m (33') C 15 m (50') D 30 m (100') C - CORRECT ANSWER-Which of the following is a property of an electromagnetic field built around a conductor that opposes any changes in current flow in a circuit? A Impedance B Capacitance C Inductance D Resistance A - CORRECT ANSWER-Which of the following markings is used for non-conductive optical fiber general-purpose cables? A OFNG B OFCR C OFCP D OFNP A - CORRECT ANSWER-Which of the following refers to a set of rules issued by a governmental body at the state level within the US? A Regulations B Best Practices C Applications D Guidelines B - CORRECT ANSWER-What is the specified performance level for Category 6 cable? A 100 MHz B 250 MHz C 500 MHz D 600 MHz A - CORRECT ANSWER-Which type of optical fiber cable should be color coded with an Orange outer cable sheath? A MM with a 100 um core diameter B Dispersion-shifted SM optical fiber C Polarization maintain SM optical fiber D SM optical fiber D - CORRECT ANSWER-Which of the following is the primary benefit of using wallmounted racks and cabinets in place of traditional equipment racks? A Provides equipment with a higher level of protection B Allows for the equipment to be easily rearranged C Optimizes airflow within the equipment room D Takes up less space within the equipment room C - CORRECT ANSWER-Which topology uses a linear configuration that places all network devices on one length of cable? A Star B Ring C Bus D - CORRECT ANSWER-Which of the Two organizations jointly oversee the worldwide standardization of telecommunications cabling? A Alliance for Telecommunications Industry Solutions (ATIS) and Society for Cable Telecommunications Engineers (SCTE) B National Electrical Contractors Association (NECA) and National Fire Protection Association (NFPA) C Comite Europeen de Normalisation Electrotechnique (CENELEC) and Electronic Industries Association (EIA) D International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) B - CORRECT ANSWER-Which of the following is designed to provide protection from harmful chemicals? A Cut-resistant gloves B Rubber gloves C Leather gloves B - CORRECT ANSWER-Which of the following is a building-serving space that houses large pieces of common active equipment? A TR B ER C TE D Mechanical Room E Battery room C - CORRECT ANSWER-Which phase of testing includes documenting the test results? A Phase 1 B Phase 2 C Phase 3 A - CORRECT ANSWER-Which of the following are typically used to support cables between a cable tray and work area outlets