CDFA Weight Verification Practice Questions with Correct Answers

CDFA Weight Verification Practice Questions with Correct Answers Specifications are particularly directed to - Correct Answer Manufacturers of devices Newly manufactured scales are required to be designated as - Correct Answer Class I, II, III, IIIL, or IIII The normal valance position of the weighbeam of a beam scale shall be - Correct Answer horizontal A county sealer/ director of W&M may, with the approval of the Secretary of Food and Agriculture, use a frequency of inspection which is - Correct Answer Different from regulations On a prescription scale equipped with a balance indicator, if this indicator consists of an indicator and a graduated scale and they are not in the same plane, the clearance between the indicator and the graduations shall not be more than - Correct Answer 0.04 inches Graduations of a scale beam shall be so varied in length that - Correct Answer they may be conveniently read A poise stop is not necessary on a steelyard when - Correct Answer there is no zero graduation The adjusting material in a poise shall be securely enclosed and firmly fixed in position and it shall not be in contact with the weigh beam, if softer than - Correct Answer brass The sensitivity requirement of a scale shall be applied in conjunction with - Correct Answer regardless of maintenance and acceptance tolerances A variable frequency inspection plan shall provide for testing of all commercial devices on - Correct Answer regular frequency, variable frequency and statistical sampling procedure Each weighing device shall have a minimum of one permanent and conspicuous identification marking with what information - Correct Answer Name, initials or trademark of the manufacturer or distributor, model number, and non repetitive serial number