Complete NIMS Test 1 Set |REVIEWED| 100% Correct

Complete NIMS Test 1 Set |REVIEWED| 100% Correct Brush *Ans* The safest way to remove chips from a lathe or milling machine Common injury from using a hand file *Ans* Being stabbed bu the tang (file without handle) MSD *Ans* Material Safety Data Sheet (page 707) NFPA *Ans* National Fire Protection Association HMIS *Ans* Hazardous Material Identification System or Hazardous Material Information System Green *Ans* The color that is not found on a HMIS label Threshold Limit Value (TLV) *Ans* The safe limit of unprotected exposure to a material MSDS information on new chemicals and materials found in the workplace can be reviewed and discussed at? *Ans* Right to know seminars and classes, and safety meetings Occupational Safety and Health Administration (OSHA) *Ans* The acronym for the government agency that regulates safety Why are shops towels or oily rags stored in a red fireproof can with a lid? *Ans* To prevent fires through spontaneous combustion What is the first course of action for when a material (solid) becomes lodged in the eye? *Ans* Pull the top lid over the bottom lid Stop bleeding by applying pressure to the wound *Ans* The first action to take with a bleeding wound Lift with the legs and keep back straight *Ans* The best technique for lifting What can happen while operating the lathe with long hair, dangling jewelry, or loose clothing? *Ans* Operator can be pulled toward the machine if anything is caught When working on material stored overhead using cranes or hoists, government safety regulations state that a person must? *Ans* Wear a hard hat