Ase A4 Practice Test - Ase A4 Steering And Suspension Test Prep - Test 1
Raise the vehicle in the air and unload the control arms before torquing them to specifications. - Answer-All of the following are true about control arm bushings EXCEPT: A. Control arm bushings are located between the vehicle's frame and the control arm. B. Worn control arm bushings result in wheel shimmy. C. Raise the vehicle in the air and unload the control arms before torquing them to specifications. D. Control arm bushings reduce friction and isolate vibrations. Technician A - Answer-Technician A says the leaf spring's shackle should swivel as the vehicle travels over bumps. Technician B says that small cracks in the longest blade of a multi-leaf leak spring are acceptable. Who is correct? A. Technician A B. Technician B C. Both A and B D. Neither A nor B Wheel bearing. - Answer-The LEAST likely to result in memory steer is a binding: A. Ball joint. B. Steering gear. C. Upper strut mount. D. Wheel bearing. There is too much negative camber. - Answer-The inside tread of the tire in the illustration shows excessive wear. Which of the following is causing this uneven tire wear? A. There is too much positive camber. B. There is too much positive caster. C. There is too much negative camber. D. There is too much negative caster. Technician B - Answer-Technician A says worn idler arm does not affect a vehicle's total toe
Información del documento
- Subido en
- 1 de mayo de 2024
- Número de páginas
- 2
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
