• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 5 páginas
Examen

CTR 156CT Propane Final Exam

Document preview thumbnail
Vista previa 2 fuera de 5 páginas

CTR 156CT Propane Final Exam If you see an "S" next to the date on a cylinder, that means the cylinder must be requalified _________ from that date. - ANSWER 10 years ____________ control the flow of propane through the piping system of a dispenser. - ANSWER Valves At room temperature, propane is in what state? - ANSWER Gas Make sure there are no ignition sources within _______ feet of the autogas filling area. - ANSWER 25 When filling a cylinder by volume and a white mist begins to escape from the fixed maximum liquid level gauge, you need to immediately __________. - ANSWER close the hose end valve The permanent marking "4BA240" tells you that the cylinder is made of ___________. - ANSWER Alloy steel A person can be inside a motorhome while the tank is being filled. - ANSWER False ___________________ is added to propane to increase the likelihood that a leak will be detected. - ANSWER Odorant Propane autogas dispensing systems typically use a ________ to fuel the vehicle. - ANSWER gasoline-style, low-emission nozzle When filling a cylinder by volume, the cylinder will be full when ________. - ANSWER white mist begins to escape from the fixed maximum liquid level gauge. A customer walks up to your propane filling station to buy Autogas for his vehicle. Can you sell him a 20lb cylinder to take back to the car to fill it where it ran out of fuel? - ANSWER No Only use fire extinguishers to create an escape route — NOT to fight a propane fire. - ANSWER True Cylinders may not be filled if they are past their ___________________ date. - ANSWER Re-qualification All vehicle-mounted ASME tanks are equipped with a(n) ________. (Select all that apply.) - ANSWER fixed maximum liquid level gauge relief valve ASME data plate Which valves do you open on the ASME tank during filling? (Select all that apply.) - ANSWER Tank filler valve Fixed maximum liquid level gauge Leaks, cracks, or bulging are often discovered during a ____________ cylinder inspection. - ANSWER pre-fill The fire extinguisher at the dispenser is used to extinguish propane fires. - ANSWER False What are the properties of Propane? (Select all that apply.) - ANSWER Odorless Nontoxic Colorless Flammable When filling a cylinder by weight, the scale set point should equal the _______. - ANSWER tare weight + propane capacity (lb) + hose and fitting weight Propane is commonly used for? (Select all that apply.) - ANSWER Water heating Grilling Clothes drying Space heating


Información del documento

Subido en
1 de mayo de 2024
Número de páginas
5
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$10.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Vendido
1
Seguidores
0
Artículos
289
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.