Module 6 - Basic Rigging Exam Questions And Answers

Module 6 - Basic Rigging Exam Questions And Answers Block and Tackle - ANS A simple rope-and-pulley system used to lift loads. Bridle - ANS A configuration using two or more slings to connect a load to a single hoist hook. Bull Ring - ANS A single ring used to attach multiple slings to a hoist hook. Competent Person - ANS An individual capable of identifying existing and predictable hazards in the surroundings and working conditions which are unsanitary, hazardous, or dangerous to employees; an individual who is authorized to take prompt corrective measures to eliminate these issues. Core - ANS Center support member of a wire rope around which the strands are laid. Hitch - ANS The rigging configuration by which a sling connects the load to the hoist hook. The three basic types of these are vertical, choker and basket. Hoist - ANS A device that applies a mechanical force for lifting or lowering a load. Lifting Clamp - ANS A device used to move loads such as steel plates or concrete panels without the use of slings. Load - ANS The total amount of what is being lifted, including all slings, hitches, and hardware. Load Control - ANS The safe and efficient practice of load manipulation, using proper communication and handling techniques. Load Stress - ANS The strain or tension applied on the rigging by the weight of the suspended load. Master Link - ANS The Main connection fitting for the chain slings. rope lay - ANS The lengthwise distance it takes for one strand of a wire rope to make one complete turn around the core.