Maine State Inspection Class A Exam Questions And Answers All Correct

Maine State Inspection Class A Exam Questions And Answers All Correct Minimum Brake Pedal Reserve - ANS 1/3 Transmission requirements - ANS Functioning Drive, Reverse, and Park Required Functional Malfunction indicator lights (Class A only) - ANS ABS, TPMS, Airbag,BRAKE Parking Brake Requirements - ANS Hold vehicle, Not connected to service brake system, no oil or grease on linings, must disengage Minimum Brake pad thickness - ANS 2/32" Maximum Brake pad crack depth - ANS 1/2 way through Reject vehicle if the brake pad surface is covered with this - ANS grease or oil Reject vehicle if brake discs or drums have these - ANS substantial cracks in friction surface, excessive rust, oil or grease contamination Reject vehicle if the inside diameter of the drum is: - ANS larger than the discard thickness stamped on the drum Reject vehicle if any brake disc thickness is: - ANS Thinner than the discard thickness stamped on the disc Hydraulic system components that must be free of leaks and structural rust - ANS Master cylinder, Reservoir, brake lines/hoses, ABS hydraulic unit, Calipers, Wheel Cylinders Power Assist Braking System Check - ANS Engine off- push pedal until it becomes firm. Start engine and ensure the brake pedal drops slightly. How to test vacuum assist check valve - ANS After checking Power assist operation, shut engine off. Press the brake pedal several times ensuring that 2 or 3 applications are assisted before the pedal becomes stiff again. Exterior body component requirements - ANS Vehicle must have solid attached hood, doors, fenders, etc.