NIMS CNC Lathe Operations Practice Test Rated A 2024.

NIMS CNC Lathe Operations Practice Test Rated A 2024. Homing - CORRECT ANSWER Typically done as part of the start-up procedure, which of the following is the process of positioning the CNC turning center's axes at a fixed reference position to allow the MCU to accurately establish / track the machine's position? Every shift - CORRECT ANSWER To maintain proper coolant levels and concentrations, and to ensure a machine tool has sufficient lubrication, a machinist should check the machine's fluids: G01 - CORRECT ANSWER Which code identifies linear interpolation (feed in a straight line)? Follow all safety rules at all times - CORRECT ANSWER Your employer has appointed you to work with the safety committee to develop a department safety manual. Which safety rule listed here will help facilitate the safest work environment for the employees in this department? A basic dimension is a numerical value used to describe a theoretical size, profile, orientation, or datum target/ Title block tolerances are not applied to a basic dimension - CORRECT ANSWER Referring to Geometric Dimensioning and Tolerancing, which of the following best describes a basic dimension? Provides tool-specific data to the control, such as the length, nose radius, and tip position. - CORRECT ANSWER Which statement best describes geometry offsets? Tool B fits this description. - CORRECT ANSWER Which of the following tools is a right-hand turning tool and will work correctly with the M03 command when installed in a standard slant bed CNC lathe? Zero Return - CORRECT ANSWER Select the mode switch position used to return a machine's axes to their home position. Check the coolant ratio with a refractometer. Add soluble oil and/or water as necessary to obtain the desired concentration. - CORRECT ANSWER Which of the methods listed here is recommended when adding fluid to a coolant tank?