Texas Safety Inspection Final Exam 2024 Questions With Correct Answers!!

True or False: A moped is not required to have insurance coverage. - Answer-False True or False: There is a separate set of criteria for the inspection of trailers that exceed 7,500 pounds. - Answer-True What additional item must you inspect for on a school bus? - Answer-Fire extinguisher At what depth of fluid within the master cylinder should you reject the inspection? - Answer-1 inch below the top of the reservoir/below manufacturer recommended level True or False: The power steering fluid being below the recommended level is not cause for rejecting the inspection. - Answer-False What model year did the emission system begin to be installed by manufacturers? - Answer-1968 Which percentage of light transmission would fail a tint inspection? - Answer-20% Which windows on the vehicle should have the tint inspected? - Answer-The front windshield and the windows to the right and left of the driver What is the minimum tire tread depth that is acceptable? - Answer-2/32 of an inch True or False: You must issue a rejection of the inspection if the wheel studs, bolts, nuts, or lugs are loose, missing, or damaged. - Answer-True What vehicles are exempt from the gas cap test? - Answer-Motorcycles True or False: The exhaust system can be patched as long as no fumes are leaking from the system. - Answer-FalseWhat model year vehicles (and newer) is the catalytic converter considered part of the exhaust system? - Answer-1984 What clearance lights are necessary on vehicles 80" or more in overall width? - Answer-2 amber lights in front, and 2 red lights in rear What color must the license plate lamp be? - Answer-White True or False: All vehicles must have at least 1 rear reflector that is red in color and placed at a height of between 15 inches and 60 inches. - Answer-False What model year vehicles require a center high-mounted stop light? - Answer-1986 and newer (passenger vehicles) and 1994 and newer (multipurpose vehicles, trucks, and buses) What is the height requirement for stop lights? - Answer-Not more than 72" or less than 15" True or False: The stop lights on the vehicle must be red or amber in color. - Answer-True What model year vehicle is one stop light required on? - Answer-1959 and older What model year vehicle are two stop lights required on? - Answer-1960 and newer True or False: The tail lights can have the appearance of blue dots. - Answer-False What model year vehicle is one tail light required on? - Answer-1959 and older What model year vehicle are two tail lights required on? - Answer-1960 and newer What color must the turn signal lights be in the rear? - Answer-Red What model year vehicle (and newer) must be equipped with turn signal lights? - Answer-1960Which of the following reasons will result in a rejection of the inspection in regards to the head lights? - Answer-Light is mounted on vehicle more than 54" or less than 24" True or False: Every vehicle must be equipped with at least two head lamps. - Answer-True What model year vehicle (and newer) must be equipped with a high beam indicator that lights whenever the uppermost distribution of light from the head lights is in use. - Answer-1948 True or False: Vehicles manufactured or assembled after the model year 1960 do not need to be equipped with electrical turn signal lamps. - Answer-False Which of the following reasons will lead to a rejection of the inspection in regards to the seatbelt? - Answer-Front lap seat belts are required and not present. Belt buckles are loosed or inoperative. Pelvic restraint is not present. Seat belt webbing is frayed, split, or torn. True or False: A vehicle only needs to be equipped with one mirror that allows a view of at least 200 feet to the rear of the vehicle. - Answer-True True or False: The windshield wiper control arm must be operational and lock in place. - Answer-True Which of the following reasons will lead to a rejection of the horn? - Answer-Unreasonably loud Harsh sound Whistle Which of the following is true regarding pedal reserve? - Answer-Power brakes are allowed 1", while conventional brakes are allowed 2" What year vehicle do you have to inspect the parking brake? - Answer-1960 and newer Which of the vehicles listed below is properly matched to the distance it is required to stop during the brake test - Answer-School Bus - 40 feetTo what speed must you get to perform a proper brake test? - Answer-20 mph True or False: If a vehicle fails the safety inspection, the owner/operator is allowed 15 days to return for one free inspection when the failing item(s) are adjusted and/or corrected. - Answer-True True or False: We don't charge customers for failed inspections. It's better to let them know they will fail and have them return once they fix the problem. - Answer-False