Mass oil burner exam questions with correct answers

Mass oil burner exam questions with correct answers What must be done before removing an oil tank and where is it obtained? - Answer ️️ -permit, from the fire department All oil tanks over ________________ must have an open air vent pipe. Minimum pipe size of ___________. The fill pipe cannot exceed the size of vent pipe. Both must terminate _______________? - Answer ️️ -10 gallons, 1 1/4", outside of building No more than how many gallon oil tank (1) can be exposed in a building? - Answer ️️ -660 gallons Exposed tanks ( more than 1) in a building cannot be more than how many gallons? - Answer ️️ -1320 What must be done with any unused openings on an oil tank? - Answer ️️ -Made vapor tight What cannot be used for fill and vent piping? - Answer ️️ -Solder copper tubing and fittings, or plastic piping. All oil tanks with fill and vent pipes must have what type of gauging device? - Answer ️️ - Visual or audible The maximum total capacity of all the tanks located above the lowest level of a building cannot exceed how many gallons? - Answer ️️ -60 The maximum total capacity of all the tanks located above the lowest level of a building has an exception what is it? - Answer ️️ -A tank on slab adjacent to first floor Vent pipe mjst terminate at least how many feet above grade? - Answer ️️ -3 feet Vent pipe must terminate ____ feet vertically and _______ horizontally from any building opening. - Answer ️️ -Two, two What mjst vent pipe have on the terminate outside of building? - Answer ️️ -water tight cap