• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 2 fuera de 6 páginas
Examen

MSF Basic eCourse: About Basic Operation

Document preview thumbnail
Vista previa 2 fuera de 6 páginas

MSF Basic eCourse: About Basic Operation FINE-C - Answer-FINE-C refers to an engine pre-start routine. It stands for Fuel, Ignition, Neutral, Engine cut-off switch, Choke and Clutch. F - Answer-Fuel, means if equipped, turn the fuel supply valve On. I - Answer-Ignition, means turn the ignition switch to the On position. Some indicator lights should come on. N - Answer-Neutral, means to be in Neutral. The green light in the instrument cluster "indicates" neutral. When in neutral, the motorcycle will roll forward and backward with the clutch lever and front brake lever released. E - Answer-Engine cut-off switch means put the switch in the Run/On position. C - Answer-Choke and Clutch, means to set the choke and squeeze in the clutch lever. The choke should be On for a cold engine, although some motorcycles do not have a choke. Engine start procedure - Answer-When starting the engine: Apply at least one of the brakes. Squeeze in the clutch lever fully. Press the starter button. Do not use the throttle if the choke is On as this could provide too much fuel to the engine. Once the engine is started, you can release the clutch lever, but do so slowly in case the motorcycle is not in neutral. Some engines will not start if the side stand is down. Many motorcycles will allow the engine to start but will stall when the motorcycle is shifted into gear when the side stand is down. Engine stop procedure - Answer-To stop the engine: First, move the engine cut-off switch to Off with your right thumb. Do this every time so you can develop the habit in case you need to shut off the engine in an emergency. Turn the ignition switch to Off. Turn the fuel supply valve Off if it has that position. It may help to remember the Engine Stop Procedure as Thumb, Key, Valve. Clutch Lever & Friction Zone - Answer-Proper use of the clutch lever and friction zone is critical for starting out smoothly and slow speed maneuvers.


Información del documento

Subido en
19 de marzo de 2024
Número de páginas
6
Escrito en
2023/2024
Tipo
Examen
Contiene
Preguntas y respuestas
$12.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Vendido
2
Seguidores
0
Artículos
992
Última venta
1 año hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.