MSSC - Quality - Basic Measurement Accurate 100%(RATED A+)

width, height, depth -ANSWER Dimensional measurement determines physical dimensions such as __________. Reference plane -ANSWER Flatness is an important geometric feature of what measurement component? U.S. Customary System -ANSWER Two systems of dimensional measurement used in manufacturing are the SI Metric System and the __________. Machinist's rule -ANSWER A __________ has its graduations engraved so that they can not be rubbed off. Reference point -ANSWER The first step in dimensional measuring is to align the end of the rule where the zero is located with one edge of the dimension you want to measure. This edge is called the __________. ±0.002 -ANSWER The measurement of a 5.000 inch part, with an instrument having __________ accuracy, should range from 4.998 - 5.002 inches. Discrimination -ANSWER Resolution is sometimes called __________. 50ths -ANSWER A common decimal inch rule graduation is in __________. 32nds -ANSWER A common fractional inch rule graduation is in __________. 1/16 -ANSWER A scale typically found on a machinist rule is __________. It can be easily stored -ANSWER A tape measure is flexible so that __________. 4 -ANSWER From a 2 ft x 3 ft piece of stock, theoretically how many 1 ft x 1.5 ft pieces can be cut? Less precise graduations -ANSWER The work measured with a tape measure requires __________ than that of work measured with a machinist's rule. instrument -ANSWER __________ error comes from either built-in sources or calibration.