TNCC 8th Edition Questions And Answers
TNCC 8th Edition Questions And Answers 2024
What are the greatest risks for transport? - Answer - Loss of airway patency,
displaced obstructive tubes lines or catheters, dislodge splinting devices,
need to replace or reinforce dressings, deterioration in patient status change
in vital signs or level of consciousness, injury to the patient and/or team
members
According to newtons law which of these two force is greater: size or force? -
Answer - Neither. For each force there is an equal and opposite reaction.
What is the relationship between mass and velocity to kinetic energy? -
Answer - Kinetic energy is equal to 1/2 the mass multiplied the square of its
velocity therefore when mass is doubled so is the net energy, however,
when velocity is doubled energy is quadrupled.
What is tension? - Answer - stretching force by pulling at opposite ends
What is compression? - Answer - Crushing by squeezing together
What is bending? - Answer - Loading about an axis. Bending causes
compression on the side the person is bending toward intention to the
opposite side
What is shearing? - Answer - Damage by tearing or bending by exerting
faucet different parts in opposite directions at the same time.
What is torsion? - Answer - Torsion forces twist ends in opposite directions.
What is combined loading? - Answer - Any combination of tension
compression torsion bending and/or shear.
What are the four types of trauma related injuries? - Answer - Blunt,
penetrating, thermal, or blast.
What are contributing factors to injuries related to blunt traumas? - Answer -
The point of impact on the patient's body, the type of surface that is hit, the
tissues ability to resist (bone versus soft tissue, air-filled versus solid
organs), and the trajectory of force.
What are the seven patterns of pathway injuries related to motor vehicle
accidents? - Answer - Up and over, down and under, lateral, rotational, rear,
roll over, and ejection.
This study source was downloaded by 100000848900824 from CourseHero.com on 10-09-2022 10:38:17 GMT -05:00
https://www.coursehero.com/file/169704399/TNCC-8th-Editiondocx/
, TNCC 8th Edition Questions And Answers
Differentiate between the three impacts of motor vehicle impact sequence. -
Answer - The first impact occurs when the vehicle collided with another
object. The second impact occurs after the initial impact when the occupant
continues to move in the original direction of travel until they collide with
the interior of the vehicle or meet
This study source was downloaded by 100000848900824 from CourseHero.com on 10-09-2022 10:38:17 GMT -05:00
https://www.coursehero.com/file/169704399/TNCC-8th-Editiondocx/
TNCC 8th Edition Questions And Answers 2024
What are the greatest risks for transport? - Answer - Loss of airway patency,
displaced obstructive tubes lines or catheters, dislodge splinting devices,
need to replace or reinforce dressings, deterioration in patient status change
in vital signs or level of consciousness, injury to the patient and/or team
members
According to newtons law which of these two force is greater: size or force? -
Answer - Neither. For each force there is an equal and opposite reaction.
What is the relationship between mass and velocity to kinetic energy? -
Answer - Kinetic energy is equal to 1/2 the mass multiplied the square of its
velocity therefore when mass is doubled so is the net energy, however,
when velocity is doubled energy is quadrupled.
What is tension? - Answer - stretching force by pulling at opposite ends
What is compression? - Answer - Crushing by squeezing together
What is bending? - Answer - Loading about an axis. Bending causes
compression on the side the person is bending toward intention to the
opposite side
What is shearing? - Answer - Damage by tearing or bending by exerting
faucet different parts in opposite directions at the same time.
What is torsion? - Answer - Torsion forces twist ends in opposite directions.
What is combined loading? - Answer - Any combination of tension
compression torsion bending and/or shear.
What are the four types of trauma related injuries? - Answer - Blunt,
penetrating, thermal, or blast.
What are contributing factors to injuries related to blunt traumas? - Answer -
The point of impact on the patient's body, the type of surface that is hit, the
tissues ability to resist (bone versus soft tissue, air-filled versus solid
organs), and the trajectory of force.
What are the seven patterns of pathway injuries related to motor vehicle
accidents? - Answer - Up and over, down and under, lateral, rotational, rear,
roll over, and ejection.
This study source was downloaded by 100000848900824 from CourseHero.com on 10-09-2022 10:38:17 GMT -05:00
https://www.coursehero.com/file/169704399/TNCC-8th-Editiondocx/
, TNCC 8th Edition Questions And Answers
Differentiate between the three impacts of motor vehicle impact sequence. -
Answer - The first impact occurs when the vehicle collided with another
object. The second impact occurs after the initial impact when the occupant
continues to move in the original direction of travel until they collide with
the interior of the vehicle or meet
This study source was downloaded by 100000848900824 from CourseHero.com on 10-09-2022 10:38:17 GMT -05:00
https://www.coursehero.com/file/169704399/TNCC-8th-Editiondocx/
