FF2 Chapter 21 Maintenance and Testing Responsibilities IFSTA questions and answers latest top score.

FF2 Chapter 21 Maintenance and Testing Responsibilities IFSTA questions and answers latest top score. Power tools should be inspected: - correct answer. at the beginning of every shift. Which location would be ideal for testing fire hose? - correct answer. Empty parking lot next to the fire station Which action should be avoided when service testing fire hose because it can cause damage to the hose? - correct answer. Testing hose in an area with rocks and debris When service testing a fire hose, it is necessary to: - correct answer. have access to a water source that is sufficient for charging the hose. When inspecting and maintaining a portable generator, the generator can be damaged if: - correct answer. it is run for a long period of time without a load. Fire hose testing records should include the: - correct answer. reason that any hoses fail the test. Which is an indicator that a fire hose should be removed from service? - correct answer. Couplings are loosening from the hose When replacing bulbs on portable scene lighting equipment, it is important to: - correct answer. allow the bulb to cool before replacing it. Which type of equipment is NOT typically maintained by a Fire Fighter II? - correct answer. Apparatus electrical systems Which piece of equipment is used to prevent pressurized hose from dangerously whipping back and forth if it ruptures? - correct answer. Hose test gate valve Which pieces of equipment are necessary to service test a fire hose? - correct answer. Hose-testing machine, portable pump, or fire department pumper When maintaining portable lighting equipment, it is safest to: - correct answer. connect each light to the generator one at a time. Replace any spark plug that: - correct answer. shows signs of arcing. What should you do if you find a problem when maintaining a portable generator? - correct answer. Consult the manual to determine the proper action After completing equipment maintenance, it is important to clean the work area and: - correct answer. document maintenance per local SOPs. Which duty would be performed by a qualified technician instead of a Fire Fighter II? - correct answer. Detailed maintenance of lighting equipment When testing fire hose, it is important to: - correct answer. close valves slowly to prevent water hammer. When would a fire hose service test be performed? - correct answer. After a vehicle has run over the hose In order to prevent damage to a portable generator, always: - correct answer. avoid starting it with equipment plugged into it and turned on. Which statement describes the proper cleaning methods for power tools? - correct answer. Different power tools require different cleaning agents, so refer to the manufacturer's guidelines for cleaning instructions. All gas-powered or diesel-powered equipment should be started and operated: - correct answer. in a well-ventilated area. When service testing a fire hose, the: - correct answer. testing area should be kept as dry as possible. When would a fire hose be tagged for repair? - correct answer. When defects are found that can be corrected Battery packs and pneumatic air cylinders should be kept: - correct answer. fully charged.