module

before attempting to lift any material you should... A.look for any protruding nails,wires, or sharp edges before attempting to lower an overhead load you should... D.size up the load what is the proper procedure to lift objects? C.lift with your legs, keep your back straight, and keep your head up when stacking bags of material that are the same width, step back and cross key the bags... C.every 10 bags high never stack or store materials... B.on scaffolds The knot shown in the figure above is a... B.clove hitch one common way to tie a clove hitch is to use two... B.half hitches when moving a material cart on an inclined or declined surface, be sure the ... A.load does not exceed the labeled weight capacity to transport a bottle of compressed gas, use a.... B. cylinder cart what device may have a rotating table surface and/or spikes on the table surface for a better grip? A. roller skid to work with motorized material-handling equipment, a worker must... A. trained, certified, and authorized how is the fall zone for a forklift operation best defined C. any area into which the lifted material could potentially fall to prevent a tipover when driving a rough terrain forklift, keep the load... B. low when