AQA
GCSE
DESIGN AND TECHNOLOGY
Unit 1 Written Paper
June 2023
, 2
Do not write
outside the
Section A – Core technical principles box
Answer all questions in this section.
Each of Questions 01 to 10 is followed by four responses, A, B, C and D.
For each question completely fill in the circle alongside the appropriate answer.
CORRECT METHOD WRONG METHODS
If you want to change your answer you must cross out your original answer as shown.
If you wish to return to an answer previously crossed out, ring the answer you now wish to select
as shown.
0 1 Which one of the following is a composite material?
A Carbonfibre reinforced plastic (CRP)
B Graphene
C High impact polystyrene (HIPS)
D Titanium
[1 mark]
0 2 Which one of the following statements is true?
A Coal is used to generate hydro-electric power.
B Fossil fuels produce argon when they burn.
C Gas is a renewable resource extracted from the ground.
D Oil is extracted from the ground to produce petroleum.
[1 mark]
IB/G/Jun23/8552/W
, 3
Do not write
outside the
0 3 Which one of the following statements is true? box
A Batteries can be safely thrown away with household rubbish.
B Rechargeable batteries can only be used ten times.
C Toys that use batteries do not have any safety features.
D Zinc carbon batteries leak and corrode.
[1 mark]
0 4 Which one of the following is a thermoforming polymer?
A Epoxy resin (ER)
B High density polythene (HDPE)
C Melamine formaldehyde (MF)
D Polyester resin (PR)
[1 mark]
0 5 Which one of the following is a working property of a material?
A Absorbency
B Density
C Fusibility
D Malleability
[1 mark]
0 6 When manufacturers focus on the reduction of waste during production, it is called
A batch manufacture.
B flexible manufacture.
C lean manufacture.
D mass manufacture.
[1 mark]
Turn over ►
IB/G/Jun23/8552/W
, 4
Do not write
outside the
box
IB/G/Jun23/8552/W
GCSE
DESIGN AND TECHNOLOGY
Unit 1 Written Paper
June 2023
, 2
Do not write
outside the
Section A – Core technical principles box
Answer all questions in this section.
Each of Questions 01 to 10 is followed by four responses, A, B, C and D.
For each question completely fill in the circle alongside the appropriate answer.
CORRECT METHOD WRONG METHODS
If you want to change your answer you must cross out your original answer as shown.
If you wish to return to an answer previously crossed out, ring the answer you now wish to select
as shown.
0 1 Which one of the following is a composite material?
A Carbonfibre reinforced plastic (CRP)
B Graphene
C High impact polystyrene (HIPS)
D Titanium
[1 mark]
0 2 Which one of the following statements is true?
A Coal is used to generate hydro-electric power.
B Fossil fuels produce argon when they burn.
C Gas is a renewable resource extracted from the ground.
D Oil is extracted from the ground to produce petroleum.
[1 mark]
IB/G/Jun23/8552/W
, 3
Do not write
outside the
0 3 Which one of the following statements is true? box
A Batteries can be safely thrown away with household rubbish.
B Rechargeable batteries can only be used ten times.
C Toys that use batteries do not have any safety features.
D Zinc carbon batteries leak and corrode.
[1 mark]
0 4 Which one of the following is a thermoforming polymer?
A Epoxy resin (ER)
B High density polythene (HDPE)
C Melamine formaldehyde (MF)
D Polyester resin (PR)
[1 mark]
0 5 Which one of the following is a working property of a material?
A Absorbency
B Density
C Fusibility
D Malleability
[1 mark]
0 6 When manufacturers focus on the reduction of waste during production, it is called
A batch manufacture.
B flexible manufacture.
C lean manufacture.
D mass manufacture.
[1 mark]
Turn over ►
IB/G/Jun23/8552/W
, 4
Do not write
outside the
box
IB/G/Jun23/8552/W
