Water Restoration Technician Exam Questions with Complete Solutions

Water Restoration Technician Exam Questions with Complete Solutions Restorative drying is a process used to recover from many forms of water intrusion by - ANSWER Assessment documentation control dryeing selective replacement The systems of drying Have been detailed in several key documents including the I RCRCS 500 standard in reference guide for professional water damage restoration - ANSWER Standard of care The goal of the restoration process is to transform an abnormal with potentially damage structure into environment that can be real occupied of legal or better appearance and cleanliness that before the intrusion occurred to do so in the most - ANSWER Economical and efficient means possible The restore begins this Process By identifying all affected materials water must be tracked from its initial source and diligently followed in every direction it migrated to establish your an accurate perimeter once the perimeter is identified at the restore then document what type of materials have been - ANSWER Affected Affected materials are evaluated against three criteria to determine if they should be restored or replacedThe three criteria are - ANSWER Degree of contamination damage to the item replacement cost versus restoration cost After identifying the material and considering contamination damage and caused the restored decides which material should be dried in which material should be replaced in addition to the restore will also decide which method of drawing should be used including - ANSWER Drained aggressively disruptive All materials that are determined restorable are inspect it further and the amount of moisture absorbed by the material is - ANSWER Measured and documented Dream process is noted during daily Monitoring visits the restore asks is it drying while comparing two sets of data on the first and second set of data recorded on the monitoring reports reflect the impact of the drain effort on the affected materials over a ______ period - ANSWER 24 If materials are not drying the restore most reevaluate the equipment systems and processes the current system is not working______Arerequired - ANSWER Change Throughout the process materials will return to normal moisture levels. The restore must constantly ask is it done? There in the motor in process. This means the restroom us know what "done" is. The materials must be compared against a - ANSWER Dry standard or dry goal