Oxygen, heat, and fuel - ANS To ignite and sustain a fire, a chemical reaction or spark is
combined with:
each chemical transported, produced or used on site. - ANS An SDS (Safety Data Sheet) is
required for:
heat - ANS The condition of warming measured by rising degree is:
All over the building - ANS Sprinklers are effective because they release an extinguishing
agent:
4-step process to use a fire extinguisher - ANS Define PASS
Grease, gas, and oil - ANS Class B fires use the following as fuel
165 degrees - ANS Most sprinklers activate at...:
Cigarettes not fully out inside a trash can - ANS When on patrol, watch for careless discards
such as:
ensure control valve is closed - ANS When checking a sprinkler system, do the following
except:
36" of cleared space at all times - ANS Aisles and corridors should have:
Activate when air temp hit a certain heat level - ANS Heat detectors:
Check the tag on the frame or door - ANS You can tell the rating on a fire door by:
fire should be in immediate are it began in - ANS If you decide to fight a fire:
Kitchens - ANS Heat detectors are best used in:
have water held back and pressurized - ANS Dry sprinkler systems:
Class B & C - ANS A carbon dioxide fire extinguisher may be used on which class of fire:
Oxygen feeds fire - ANS Windows should be closed during a fire because: