Module 104 Introduction to Power Tools Review Questions with verified solutions

Module 104 Introduction to Power Tools Review Questions Pneumatic tools get their power from a. air pressure The most common use of the power drill is to c. make holes in wood, metal and plastic A masonry bit is able to drill into concrete and similar material because it has a d. carbide tip An example of an electric power drill that is designed to be used in tight space is a(n) b. right-angle drill The electromagnetic drill is a c. portable drill used on thick material Hammer drills are designed to drill into b. concrete, brick, and tile A pneumatic impact wrench requires the use of a. impact sockets that are designed for the applicable tool When cutting with a circular saw, grip the saw handles d. firmly with two hands The high speed setting on a reciprocating saw is used for c. sawing wood and other soft materials When using a saber saw, avoid vibration by b. using a clamp or vise to hold the word Before using a reciprocating saw to cut through a wall or partition, always a. find out what is on the other side Use only a band saw that has a d. stop A sliding compound miter saw has a rail that allows the blade to slide forward and backward, which enables the saw to b. cut wider material than a standard miter saw The blade of an abrasive cutoff saw spins at such a high speed that c. the resulting friction is hot enough to burn through material The end grinder is used to d. smooth the inside materials, such as pipe A detail grinder smoothes and polishes intricate metallic work by using attachments called a. point Power-actuated fastening systems are used to b. anchor static loads to steel beams Before you begin setting up a pavement breaker for use, make sure that the air pressure is a. shut off at the main air outlet Porta-Power cylinders are rated by how much weight they can lift and by c. the distance they can move the weight Hydraulic jacks are used when the application calls for b. extreme force to be applied