PLTW (Introduction To Engineering and Design): Unit 2 Latest Test Study Guide with 100% Correct Answers

PLTW (Introduction To Engineering and Design): Unit 2 Latest Test Study Guide with 100% Correct Answers Cabinet Pictorial Correct Answer Oblique pictorial where depth is represented as half scale compared to the height and width scale. Cavalier Pictorial Correct Answer Oblique pictorial where height, width, and depth are represented at full scale. Center Line Correct Answer A line which defines the center of arcs, circles, or symmetrical parts. Construction Line Correct Answer Lightly drawn lines to guide drawing other lines and shapes. Depth Correct Answer The measurement associated with an object's front-to-back dimension or extent of something from side to side. Dimension Correct Answer A measurable extent, such as the three principal dimensions of an object is width, height, and depth. Dimension Line Correct Answer A line which represents distance. Documentation Correct Answer 1. The documents that are required for something or that give evidence or proof of something. 2. Drawings or printed information that contain instructions for assembling, installing, operating, and servicing. Drawing Correct Answer A formal graphical representation of an object containing information based on the drawing type. Edge Correct Answer The line along which two surfaces of a solid meet. Ellipse Correct Answer A regular oval shape, traced by a point moving in a plane so that the sum of its distances from two other points is constant, or resulting when a cone is cut by an oblique plane which does not intersect the base. Extension Line Correct Answer Line which represents where a dimension starts and stops. Freehand Correct Answer Sketching which is done manually without the aid of instruments such as rulers.