MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024

MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024MSF Basic eCourse: Preparing to Ride Latest Update 2023/2024 Motorcycle Fit - ANSWER-Your motorcycle should be one you can handle well. Two primary features to consider are Seat Height and overall Motorcycle Size. The seat should be low enough so your feet can reach the ground and support the motorcycle. Overall motorcycle size generally refers to engine size, which is referred to in cubic centimeters (cc's), or cubic inches. Motorcycles with larger engines are generally heavier and more powerful than those with smaller engines. Pick a size that is right for your strength and skill level so you can handle it well. Additionally, you may be able to adjust the controls or change the seat to fit you better. Pre-Ride Inspection - ANSWER-A pre-ride inspection only takes a few minutes, and should be as routine as brushing your teeth. It's easy to check important parts, but each item should be checked before every ride. This helps you find problems before they become serious. Your best source of information is the motorcycle owner's manual. A good inspection method is called T-CLOCS. It stands for Tires and Wheels, Controls, Lights and Electrics, Oil and other Fluids, Chassis, and Stands. Tires and Wheels - ANSWER-Is your bike ready to ride? Will it perform the way it should? If not, it might leave you stranded, your repair or maintenance costs might go way up, or it might not even be safe to ride. Do a pre-ride check. We call it T-CLOCS. T, for tires and wheels.