NACE CIP Level 1 Standards (SOLVED!)
ASTM D3276 correct answers Standard Guide for Painting Inspectors. States that the minimum surface temperature for coating is usually 40F, max is 125F. ISO 8501 St3 correct answers Very Thorough Hand and Power Tool Cleaning. Same as for St2, but the surface shall be treated much more thoroughly to give a metallic sheen arising from the metallic substrate. NACE 4 (SSPC-SP7) correct answers Brush off Cleaning. Same cleanliness as NACE 1 (SSPC-SP5) and tightly adherent mill scale, rust, and coating may remain on the surface. SSPC-SP3 correct answers Power Tool Cleaning ISO 8501 Sa 2.5 correct answers Very Thorough Blast Cleaning NACE 8 (SSPC-SP 14) correct answers Industrial Blast Cleaning. Lightly adherent mill scale, rust, and coating residue are permitted to remain on 10% of each unit area of the surface. NACE 8 (SSPC-SP 14) Lightly adherent mill scale, rust, and coating residue are permitted to remain on ____ of each unit area of the surface. correct answers 10 SSPC-VIS 3 correct answers Visual Guide for Rust Grades. Rust Grades A-D (A is the worse) SSPC SP-1 correct answers Solvent Pre Cleaning ISO 8501 Sa3 correct answers Blast Cleaning to Visually Clean Steel. Surfaced shall be free from oil, grease, dust, dirt, free from the mill scale, rust, paint coatings, and other foreign matter. correct answers ISO 8501 Sa3
Información del documento
- Subido en
- 19 de agosto de 2023
- Número de páginas
- 2
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
