EMT Module 7, Complete Verified Solution
EMT Module 7, Complete Verified Solution Priority 1 ("hot") response Ambulance response to an emergency; lights-and-sirens mode; constitute less than 5% of all transports Priority 3 ("cold") response Ambulance response at normal speed 50-100 feet other drivers do not see or hear an ambulance until it is within this distance of them typical ambulance collision conditions dry road with clear weather during daylight hours in an intersection steps of transfer to an ambulance 1. Select the proper patient-carrying device; 2. Package the patient for transfer; 3. Move the patient to the ambulance; 4. Load the patient into the ambulance packaging the sequence of operations required to ready the patient to be moved and to combine the patient and the patient-carrying device into a unit ready for transfer patient-carrying device must have a minimum of 3 straps for securely holding the patient: one at chest level, one at hip or waist level, and one on the lower extremities legs raised 8 to 12 inches position that can be used to transport a patient in shock 1:100 bleach-to-water mixture intermediate-level disinfectant that can be used to clean and kill germs on equipment surfaces; purpose for carrying it on the ambulance is to destroy mycobacterium tuberculosis low-level disinfectant can be used to clean and kill germs on ambulance floors and walls; ex: Lysol Landing zone (LZ) Area without aerial obstruction required by a helicopter that is approximately 100-by-100 feet and on ground that has a slope of less than 8 degrees Questions an EMD should ask a caller reporting a medical emergency What is the exact location of the patient? What is your call-back number? What's the problem? How old is the patient? What's the patient's sex? Is the patients conscious? Is the patient breathing?
Información del documento
- Subido en
- 13 de julio de 2023
- Número de páginas
- 10
- Escrito en
- 2022/2023
- Tipo
- Examen
- Contiene
- Preguntas y respuestas