A.3 TestOut PC Pro Certification Practice Exam Questions and Answers

A.3 TestOut PC Pro Certification Practice Exam Questions and AnswersA.3 TestOut PC Pro Certification Practice Exam Questions and AnswersA.3 TestOut PC Pro Certification Practice Exam Questions and AnswersA.3 TestOut PC Pro Certification Practice Exam Questions and AnswersA.3 TestOut PC Pro Certification Practice Exam Questions and AnswersYou work at a computer repair store. A customer purchased and installed the latest AMD Phenom II processor in their computer. However, now the computer will not start. You need to repair the customer's computer. In this lab, your task is to: Verify the problem. Possible problems include: ~ The heat sink and fan are not installed. ~ The fan power connector is not connected to the motherboard. ~ The CPU is not supported by the BIOS. ~ The CPU is bad. Diagnose and correct the problem. - ANSWER-Verify the problem. Select the power button to start the computer. The computer fails to start. Select OK to close the message. Examine the details of the CPU. Above the computer, select Motherboard to switch to the motherboard view of the computer. Select the motherboard. From the Selected Component pane, identify the socket type for the motherboard. From the Selected Component pane, select Details. Select the Specifications tab. Read the motherboard documentation to identify additional requirements for the CPU. Identify the location of the CPU fan connector. Close the Motherboard Details window. Verify that all CPU power cables are connected. Select the Heat Sink and Fan. From the Selected Component pane, verify that the Connector, Fan, CPU 4-pin power connector is connected to the motherboard. Because everything is connected properly, you will need to replace the CPU. Install a new CPU. Drag the Heat Sink and Fan to the Workspace.