• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 16 páginas
Examen

Lean Six Sigma Complete With Correct Solutions.

Document preview thumbnail
Vista previa 3 fuera de 16 páginas

ToF: Is the basic concepts of Lean are: Just In Time, continuous flow and waste elimination? True ToF: A non-value added activity is on that a customer is willing to pay for? False ToF: By optimizing the time spent of Non-Value Added activities and eliminating a large proportion of the Non-Value Added (required) Lean methodologies enable companies to achieve breakthrough results. False optimize Value Added Actives What describes the use of a Product Family Matrix? Compares process steps across products and identifies logical groupings Lean manufacturing is most concerned with which one of the following? Reducing waste A team is looking at its process from the perspective of the material flow (from the supplier to customer) and information flow (from customer to supplier). What Lean technique are they using? Value Stream Mapping Using Lean thinking and principles reduces waste, identifies value streams, and provides which of the following benefits? Allows the customer to pull product as needed, rather than pushing product to the customer In comparing Lean principles to Six Sigma principles, which of these statements is false? A Six Sigma principles are problem-focused and stem from the fundamental belief that process variation is waste B Six Sigma focuses on improving value streams C Lean is focused on process flow and views activities that do not add value as waste D Lean uses visuals to understand the process flow B Who is responsible for providing the organizational structure for supporting Lean? A Kaizen Team Leader and team members B Executive Champion C Lean Leader D Deployment Champion B Which of the following will enable flow? A Supervising people B Implementing a new inventory management system C Eliminating sources of waste D Reducing the number of your suppliers C The Cost of Poor Quality is most often calculated during which phase of the Six Sigma Methodology? A Improve B Measure C Analyze D Control B Judging if a product meets customer requirements is the main purpose of... A specification limits. B warning limits. C control limits. D run rule limits. A Which term describes measurement of the capability of a process? A Defects per Million Opportunities (DPMO) B Critical to Quality (CTQ) C Just in Time (JIT) D Design of Experiments (DOE) A Which member of the team maintains responsibility over authority and accountability for the effort? Executive champion Storming In this stage the team leader will help to build self direction through the resolution of power and authority issues, decision-making agreements, allowing the team to become more independent, using established ground rules to guide team behavior, establish equal participation opportunities Norming A stage in team development where cooperation is built A tool that helps turn a large, seemingly overwhelming amount of work into tasks that are doable, manageable, and measurable is called a... A WBS (Work Breakdown Structure). B SIPOC. C Project Charter. D SMART. A Who is likely to be affected by the outcome of the improvement project and could be responsible for the final decision on implementing the proposed solution? A Team Leader B Executive Champion C Stakeholder D Project Champion C The roadmap a team uses to manage and control resources, time and money to meet improvement objectives is the... A problem statement. B goal or AIM statement. C project charter. D business case. C Which plan is created to ensure that the champion, mentor, process owner, and key stakeholders are aware of the team purpose, team objectives, meeting results and deliverables? A Business Plan B Project Plan C Communication Plan D AIM Statement C Where does the Project Charter's Measurable Goal come from? A Business Case B Management Directive C Voice of the Customer (VOC) D Project Plan C Process Owner Team member responsible for the process that is being worked on by the team Executive Champion Team member that maintains responsibility over authority and accountability for the effort The question is: The amount of improvement a team expects to achieve as a result of the project is defined in the... A problem statement. B goal or AIM statement. C stakeholder analysis. B What does a diamond mean on a flow chart Identifies a decision point Process mapping is helpful in detecting: Gaps in meeting customer requirements The cost related to verifying, checking, and testing of purchased goods and/or services is an example of... A appraisal costs. B internal failure costs. C prevention costs. D external failure costs. A Which category of Cost of Poor Quality would include the cost if a vendor repeatedly sent poor plastic for card creation? A Appraisal costs B Prevention costs C Internal failure costs D External failure costs A It was discovered that several agents were classifying the same type of customer inquiry using different codes. This explanation for the change in the data would be best classified as? A. Expected variation B. A change to the process C. A change to the measurement system C A measurement system that is very accurate will always be very precise. False What does R&R in Gauge R&R represent? A. Rest and Relaxation B. Repeatably and Reproducible C. Removal and Replacement D. Repair and Re-calibrate B A measure of how consistently a measurement system measures the same event over time is called? A. Linearity B. Stability C. Bias D. Reproducible B If the measurement system is used for process improvement, or reducing part-to-part variation, which metric is most useful? A. % Tolerance (P/T ratio) B. Number of distinct categories C. % Study variation (P/TV ratio) D. Gauge linearity C In a Gauge R&R study, 8 parts are being analyzed by 4 inspectors and each inspector tests each part 3 times, how many total times is each part being measured in the study? ... If the number of distinct categories is 12, this indicates that the measurement system... A. Cannot reliably distinguish between parts B. Can only sort parts into high and low categories C. Results are inconclusive D. Can distinguish between parts very well D What is the term used to describe when the average value of multiple measurements of an event are equal to the true value? A Zero defects B Accuracy C Precision D Repeatability B The use of graphical and numerical methods to organize, summarize and present data in a meaningful way for the purpose of making more informed decisions is known as... A Descriptive Statistics. B Quantitative Reasoning. C Inferential Statistics. D Qualitative Knowledge A Using information gathered from sample data to make estimates, predictions, or other generalizations about a larger set of data called a population is known as... A Inferential Statistics. B Data Dumping. C an Informed Decision. D Descriptive Statistics. A A sample in statistics is... A the people selected from a designated country. B a portion of the population under study. C the people selected at random from the population of a designated city. D all the elements in a population. B Draw a Cumulative Frequency Curve ... In a relative frequency distribution the word "relative" implies "relative to the... A data analyst." B proportion of the data values." C size of the data set." D size of the page on which the graph will be displayed." C In a distribution, the mean is 23 and the median is 15.79. The distribution is... A skewed left. B skewed right. C symmetrical. D bell-shaped. B MEDIANMEAN A random sample of 8 measurements had a sample mean of 5.2 and a median of 6 and a mode of 4. Which of the following statements is correct? A The sum of the measurements is 48. B 50% of the data is less than or equal to 5.2. C The frequency is 3. D The 50th percentile of the data is 6. D In a distribution, the mean is 13.79 and the median is 21. The distribution is... A skewed left. B skewed right. C symmetrical. D bell-shaped. A MEDIANMEAN The average weight for the five starting offensive linemen of the Charlotte Panthers is 300 pounds. The heaviest starter gets injured and his replacement weighs 20 pounds more than the injured starter. Which of the following statements are correct? A The average weight of each player on the new offensive line increased by 20 pounds. B The average weight of the new offensive line is 305. C Without knowing the player's weights, we can't compute the average weight of the new line. D The range of the weights for the new offensive line is 20 pounds greater than the range of weights for the original five starters. D T or F: The primary disadvantage in using the standard deviation as a measure of variability is it only uses two measures from the data F: The range only uses two data values T or F: The values of the variance and the standard deviation are never zero F: If all the data values are the same, the variance would equal zero T or F: The variance of the population data is the average of the squared deviations from the mean T: The formula is the sum of the squared deviation divided by the N The variance of the a data set will always be greater than the mean of the data. F: The two measurements are independent of each other. Mean affects location, variance affects dispersion A sample of 8 measurements randomly selected from a population had a mean of 20 and a standard deviation of 4. If you added 4 measurements to this data set and each measurement was equal to 20, which one of the following statements would be correct about the new data set of 12 measurements? The standard deviation would decrease. The sum of the deviations of the scores about the mean for any data set... A is always negative. B is always positive. C is always zero. D varies from sample to sample. c The mean and standard deviation of the grades of 500 students who took a statistics test were 69 and 7, respectively. The grades have a bell-shaped distribution. Based on this information, which one of the following is the best estimate of the number of students with grades between 55 and 83? A 95% B 475 C At least 75% D 375 b For a bell-shaped distribution, which Z score value would best approximate the 84th percentile? A -2 B -1 C 0 D +1 E +2 d The three steps for performing a Root Cause Analysis are... A 1) Measure the symptom to gauge the needed action; 2) Correct the cause by running a Kaizen Event; and 3) Re-measure the process to see if the problem has been eliminated. B 1) Everything happens for a reason; 2) Cause and effect are part of a continuous chain; and 3) An effect can be due to both a cause and a condition. C 1) Identify and eliminate the cause of the variation; 2) Simplify the process so errors can not occur; and 3) Standardize the activities such that all work will be performed exactly in the same manner. D 1) Define the problem in terms of the observed effect; 2) Analyze why and when the problem happened; and 3) Develop a permanent solution to prevent the problem from reoccurring. D The three basic rules of Cause and Effect are... A 1) Everything happens for a reason; 2) Cause and effect are part of a continuous chain; and 3) An effect can be due to both a cause and a condition. B 1) Brainstorm ideas and solutions; 2) Record the output; and 3) Share the information with the Stakeholders to gain their concurrence. C 1) Display the many potential causes for a specific problem or effect; 2) Immediately sort the ideas into useful categories; and 3) Weight the ideas by team consensus. D 1) Use it to study a problem to determine the root cause; 2) Examine the potential reasons why a process is having problems; and 3) Fix them. A FMEA is a (blank) used to (blank) and (blank), the impact of their occurrence systematic approach examine potential failures prevent, or minimize impact Which one of the following best describes the concept of using Mistake Proofing within Failure Mode and Effects Analysis? A Mainly focus on using detection methods to prevent the defect from reaching the customer. B It is the preferred method for improving detection techniques or equipment. C Adding inspection points in the process to monitor for the failure mode. D Changing the specifications to eliminate the defect. B The three most frequently used Variables Control Charts are? X and MR X-bar and R X-bar and S What is the subgroup size for X bar and R chart? 2-9 T or F. All processes have natural variability due to common causes and unnatural variabliity due to special causes, often referred to as assignable causes. T T or F. The nelson rules are proccess control method applied to control charts and used to determine if some measured variable is out of control (unpredictable verus consistent). The rules describe 9 conditions, when present in a Control Chart, are considered as an indication that the process is out of statistical control. F There are two basic types of control charts that are based on the data utilized within a specific process or project. They are (blank) and (blank) Variables data chart attribute data charts What type of variation is the unusual, not previously observed, non-quantifiable variation within a process or system - the signal, within a process or system, that something is wrong? Special Cause The symbol S refers to which one of the following terms? Standard dev When referring to a c Chart, the "c" refers to which one of the following terms? A Count B Continuous Data C Standard Deviation D Sample Average A Which one of the following statements is true about an X and MR Chart? A It is used only for sample sizes greater than 10. B It is used only when the sample size is greater than 1. C It is used in situations when only a single measurement is taken. D It is used only for Attribute Data. c An important Design of Experiments technique to get a more reliable estimate if a factor is... A randomization. B estimate effects. C replication. D factor coding. C An action in which the cause of variation is identified and corrected temporarily is called... A Corrective Action. B Prevention. C Compensating. D Reaction. A Which of the following would you calculate a confidence interval for? A Population Mean B Sample Mean C Population p-value D Sample Variance A Which one of the following best completes the statement? We use inferential statistics to estimate... A population statistics. B sample statistics. C population parameters. D sample parameters. c Is the following statement True or False? A confidence interval gives us a measure of reliability that the calculated interval contains the true value of the sample statistic. A True B False b What are the two general methods used to make inferences about population parameters? A Hypothesis Testing and Sampling B Confidence Intervals and Sampling C Hypothesis Testing and Confidence Intervals D Qualitative and Quantitative Analysis c Is the following statement True or False? "When the null hypothesis, Ho, is rejected, a Type I error could be committed." A True B False A Which of the following roles often serves as the resource for removing roadblocks and resistance? A Kaizen Team Leader B Deployment Champion or Project Champion C Kaizen Team Members D Executive Champion Deployment Champion or Project Champion Lean manufacturing is most concerned with which one of the following? A Reducing waste B Reducing people C Eliminating bottlenecks in a process Reducing Waste Which of the following is a condition that drives companies to adopt a Lean approach? A A desire to achieve lower attrition B A desire to increase variation in products C Increasing competition and the need for differentiation D Shareholder value Increasing competition and the need for differentiation In which phase of Six Sigma will the project responsibilities transition from the process improvement team to the operations team? A Improve B Analyze C Control D Define C


Información del documento

Subido en
23 de noviembre de 2022
Número de páginas
16
Escrito en
2022/2023
Tipo
Examen
Contiene
Preguntas y respuestas
$15.49

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
EvaTee
3.9
(989)
Vendido
5475
Seguidores
3583
Artículos
59451
Última venta
1 día hace




Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.