• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 3 fuera de 29 páginas
Examen

Study Material for API 1104 CWI 046 - Practice-Ready Answer Guide

Document preview thumbnail
Vista previa 3 fuera de 29 páginas

Study Material for API 1104 CWI 046 - Practice-Ready Answer Guide In which of the following ways are fluxes for SAW classified when classified according to the manner in which they modify the composition of the weld metal? a. Oxidizing or reducing b. Fused or agglomerated c. Granular or powdered d. Neutral, active or alloy e. Covered or self-shielded - answer - b. Fused or agglomerated What does the 'R' indicate in the wire ER70S-3 AWS filler metal classification? a. Rolled in a spool b. May be used as a filler rod c. Rust resistant d. Rosin core e. Reverse Polarity - answer - b. May be used as a filler rod Which of the following is/are false regarding good quality records? a. All records should be prepared by the welding inspector b. They record as much detail as necessary c. They include explanation of repairs d. They state how well the work stayed with prescribed tolerances. e. All of the above - answer - a. All records should be prepared by the welding inspector Porosity in the weld bead can result from which of the following? a. Contaminated electrodes b. Contaminated shielding gas c. Moisture pickup d. Arc voltage too high e. All of the above - answer - e. All of the above Overexposure to X-rays or gamma rays may cause damage to human ______________________. a. Sexual organs b. Blood tissue c. Skin d. Internal organs e. All of the above - answer - e. All of the above Which of the following conditions will affect the rate and extent to which a liquid penetrant will enter cracks, fissures and other small openings? a. The hardness of the specimen being tested b. The surface condition of the specimen being tested c. The color of the penetrant d. The conductivity of the specimen being tested e. The magnetic field residual in the specimen - answer - b. The surface condition of the specimen being tested Which of the following activities are encountered in welding inspection? a. Selection and examination of production test samples b. Verification of approved welding procedures c. Verification of personnel qualifications d. Only (b) and (c) e. Only (a), (b) and (c) - answer - e. Only (a), (b) and (c) a. Selection and examination of production test samples b. Verification of approved welding procedures c. Verification of personnel qualifications Destructive tests of welds are designed to ___________________. a. Determine the mechanical properties(i.e. tensile strength, ductility and toughness) b.Determine the modulus of elasticity of a weld metal c. Calculate the percentage of reduction in area for an all-weld-metal specimen d. Determine the soundness of weld metal e. All of the above - answer - e. All of the above In GMAW, shielding gas selection will not have a pronounced effect on which of following: a. Electrode extension b. Undercutting tendency c. Mode of metal transfer d. Penetration e. Arc characteristics - answer - a. Electrode extension Which of the following FCAW process variation is most suitable for windy field conditions? a. Self-shielded b. Bare wire c. Metal core d. Gas-shielded e. Autogenously - answer - a. Self-shielded Which of the following statements is correct regarding magnetic particle testing? a. It is sensitive enough to readily able to detect subsurface discontinuities b. It can be performed on all type of material, ferrous and non-ferrous c. Subsurface discontinuities are easily seen and interpreted with this method d. Subsurface discontinuities near the surface may be observed, but they may not be clearly defined e. None of the above - answer - d. Subsurface discontinuities near the surface may be observed, but they may not be clearly defined Which of the following is a cast iron electrode to AWS A5.15, Specification for Welding Electrodes and Rods for Cast Iron? a. ENiFe-CI-A b. EWC-30/40 c. E8018-C1 d. ECuAL-A2 e. ENi-Mo - answer - a. ENiFe-CI-A Which of the following is a disadvantage of some manual brazing processes in comparison to the automated ones? a. It cannot be


Información del documento

Subido en
19 de noviembre de 2026
Número de páginas
29
Escrito en
2026/2027
Tipo
Examen
Contiene
Preguntas y respuestas
$12.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
SARAHnkalu
4.6
(7)
Vendido
48
Seguidores
0
Artículos
7562
Última venta
1 semana hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes

Ups! No podemos cargar tu documento ahora. Inténtalo de nuevo o contacta con soporte.