• ¿Documento equivocado? Cámbialo gratis
  • Escrito por estudiantes que aprobaron
  • Inmediatamente disponible después del pago
  • Leer en línea o como PDF
Vender
¿Dónde estudias?
Tu idioma
Document preview thumbnail
Vista previa 1 fuera de 3 páginas
Otro

Api 1104 Terms & Definitions Verified Study Guide

Document preview thumbnail
Vista previa 1 fuera de 3 páginas

Api 1104 Terms & Definitions Verified Study Guide

Vista previa del contenido

API 1104 TERMS & DEFINITIONS VERIFIED STUDY GUIDE


Automatic Welding - Answers - Arc welding with equipment that performs the entire
welding operation without manual manipulation of the arc or electrode other than
guiding or tracking and without a manual welding skill requirement of the operator.

Back Weld Repair - Answers - Repair weld made at the back side of a groove weld.

Branch Weld - Answers - Completed groove and/or fillet weld joining a set-on or set-
in branch pipe or a set-on or set-in branch fitting to a run pipe.

Company - Answers - Owner company or the engineering agency in charge of
construction.

Note: A _________ may act through an inspector or another authorized
representative.

Contractor - Answers - That which includes the primary contractor and any
subcontractors engaged in work covered by this standard.

Cover Pass Repair - Answers - Repair to the weld face located and contained within
the external reinforcement, including external undercut.

Defect - Answers - Imperfection of sufficient magnitude to warrant rejection based on
the acceptance criteria in this standard.

Double Repair - Answers - Second repair in a previously repaired area of a
completed weld; typically referred to as a "repair of a repair" or a "re-repair"

Full Thickness Repair - Answers - Repair weld originating from the weld face that
penetrates completely through the weld thickness.

Grinding - Answers - Mechanical means to remove weld metal using abrasive
methods.

Imperfection - Answers - Discontinuity or irregularity that is detectable by methods
outlined in this standard

Indication - Answers - Evidence obtained by nondestructive testing

Internal Concavity (IC) - Answers - Bead that is properly fused to and completely
penetrates the pipe wall thickness along both sides of the bevel but whose center is
somewhat below the inside surface of the pipe wall.

Mechanized Welding - Answers - Process where parameters and torch guidance are
controlled mechanically or electronically but may be manually varied during welding
to maintain the specified welding conditions.

Información del documento

Subido en
17 de noviembre de 2026
Número de páginas
3
Escrito en
2026/2027
Tipo
Otro
Personaje
Desconocido
$15.99

¿Documento equivocado? Cámbialo gratis Dentro de los 14 días posteriores a la compra y antes de descargarlo, puedes elegir otro documento. Puedes gastar el importe de nuevo.
Escrito por estudiantes que aprobaron
Inmediatamente disponible después del pago
Leer en línea o como PDF

Seller avatar
Los indicadores de reputación están sujetos a la cantidad de artículos vendidos por una tarifa y las reseñas que ha recibido por esos documentos. Hay tres niveles: Bronce, Plata y Oro. Cuanto mayor reputación, más podrás confiar en la calidad del trabajo del vendedor.
GEEKA
3.8
(379)
Vendido
2239
Seguidores
1451
Artículos
63595
Última venta
1 día hace



Por qué los estudiantes eligen Stuvia

Creado por compañeros estudiantes, verificado por reseñas

Calidad en la que puedes confiar: escrito por estudiantes que aprobaron y evaluado por otros que han usado estos resúmenes.

¿No estás satisfecho? Elige otro documento

¡No te preocupes! Puedes elegir directamente otro documento que se ajuste mejor a lo que buscas.

Paga como quieras, empieza a estudiar al instante

Sin suscripción, sin compromisos. Paga como estés acostumbrado con tarjeta de crédito y descarga tu documento PDF inmediatamente.

Student with book image

“Comprado, descargado y aprobado. Así de fácil puede ser.”

Alisha Student

Preguntas frecuentes