Questions with Correct Answers (Grade A+)
Question 1: The oldest and largest radiologic science professional organization is the:
Answer: American Society of Radiologic Technologists (ASRT)
Question 2: The organization that sets standards and prepares examinations necessary to certify
radiologic technologists and limited operators is the:
Answer: American Registry of Radiologic Technologists (ARRT)
Question 3: The radiation that exits the opposite side of the patient to expose the image receptor (IR)
is called:
Answer: Remnat radiation
Question 4: The term used to describe radiation that is absorbed by matter is:
Answer: Attenuation
Question 5: The "unseen" image that is contained in the image receptor (IR) before it is processed is
called the:
Answer: Latent image
Question 6: The radiation that exits the body in all directions and causes unwanted exposure on the
image receptor (IR) as well as anyone who is in the room is called __________ radiation
Answer: Scattered
Question 7: The radiation that exits the x-ray tube and travels in-air to the patient is called:
Answer: Primary
Question 8: The boxlike device attached under the tube housing that allows the limited operator to
vary the size of the radiation field is called the:
Answer: Collimator
Question 9: An invisible line in the center of the x-ray beam and perpendicular to the long axis of the
x-ray tube is called the:
Answer: Central Ray
Question 10: An exposure time of 0.02 seconds is equal to how many milliseconds?
Answer: 20 msec
Page 1
,Question 11: The number 9 squared is equal to:
Answer: 81
Question 12: The number 4 is the square root of:
Answer: 16
Question 13: When 62 kVp is increased by 30%, the result is approximately:
Answer: 81
Question 14: When the fraction 7/8 is converted to a decimal, the result is:
Answer: 0.875
Question 15: When 230% is expressed as a decimal, the result is:
Answer: 2.3
Question 16: A radiographic image is made using 500 mA, 0.1 sec., 80 kVp, and 48-inches SID. The
value of the mAs for this exposure is
Answer: 50 mAs
Question 17: X-rays have electromagnetic energy. The velocity (or speed) of this energy travels at a
speed of:
Answer: 186,000 miles per second
Question 18: The smallest possible unit of electromagnetic energy is the:
Answer: Photon
Question 19: The electrical current flowing in an x-ray tube is measured in:
Answer: Milliamperes
Question 20: The force or strength of the electron flow in an electrical current is measured in:
Answer: Kilovoltage
Question 21: The device used to produce the high voltage needed for x-ray production is called the:
Answer: Transformer
Question 22: In radiology, 80,000 volts is converted to:
Answer: 80 kVp
Page 2
, Question 23: The target and the filament in the x-ray tube are made of:
Answer: Tungsten
Question 24: Electrons are made available in the filament of the x-ray tube by a process called:
Answer: Thermionic emission
Question 25: The anode in x-ray tubes rotates at a high rpm to:
Answer: Dissipate the heat
Question 26: The target in the x-ray tube is angled to affect the: 1. heat capacity 2. number of
photons 3. sharpness of the image
Answer: 1 and 3
Question 27: Which of the following would be a common small focal spot size in an x-ray tube?
Answer: 0.6 mm
Question 28: What size of target angle is required for the radiation to cover a 14-in x 17-in IR at a
distance of 40 inches?
Answer: 12 degrees
Question 29: The intensity of the x-ray beam is greatest at the:
Answer: Cathode end of the beam
Question 30: The penetrating power of the x-ray beam is controlled by varying the:
Answer: kVp
Question 31: If the mA is doubled, the x-ray photons emitted from the tube:
Answer: Double
Question 32: The x-ray tube inside the protective housing is made of:
Answer: Pyrex glass
Question 33: What material is used as the added filter material in x-ray tubes?
Answer: Aluminum
Question 34: What percentage of the total energy applied to an x-ray tube target is converted into
x-rays?
Answer: 99%
Page 3