QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) Q&A 2027 |INSTANT DOWNLOAD PDF
1. What is the primary purpose of diagnostic radiography?
A. To treat infectious diseases B. To produce images of internal
body structures C. To measure blood pressure D. To perform
surgical procedures
Correct Answer: B. To produce images of internal body
structures
Rationale: Diagnostic radiography uses X-rays to create images
that help healthcare professionals identify injuries, diseases,
and abnormalities.
2. Which type of radiation is used in conventional
radiography?
A. Alpha particles B. Beta particles C. X-rays D. Sound waves
Correct Answer: C. X-rays
Rationale: X-rays are electromagnetic radiation capable of
penetrating body tissues and producing diagnostic images.
3. What is the main function of the X-ray tube?
A. To detect radiation B. To generate X-rays C. To store digital
images D. To measure patient temperature
Correct Answer: B. To generate X-rays
,Rationale: The X-ray tube converts electrical energy into X-ray
photons through the interaction of high-speed electrons with a
target material.
4. Which component of the X-ray tube produces electrons?
A. Anode B. Cathode C. Collimator D. Grid
Correct Answer: B. Cathode
Rationale: The cathode contains a filament that releases
electrons through thermionic emission when heated.
5. What is the primary function of the anode?
A. To produce electrons B. To absorb scattered radiation C. To
serve as the target for electrons D. To control patient
positioning
Correct Answer: C. To serve as the target for electrons
Rationale: Electrons from the cathode strike the anode target,
producing X-rays and heat.
6. What does kVp primarily control in radiography?
A. X-ray beam energy and penetrating ability B. Exposure time
only C. Patient positioning D. Image storage capacity
Correct Answer: A. X-ray beam energy and penetrating ability
Rationale: Kilovoltage peak determines the maximum energy of
X-ray photons and strongly influences beam penetration and
image contrast.
7. What does mAs primarily control?
,A. Beam direction B. Quantity of X-ray photons produced C.
Focal spot size D. Image receptor distance
Correct Answer: B. Quantity of X-ray photons produced
Rationale: Milliampere-seconds represent tube current
multiplied by exposure time and determine the quantity of
radiation produced.
8. Which principle reduces unnecessary radiation exposure to
patients?
A. Increasing exposure time B. Using the largest possible field
size C. Applying the ALARA principle D. Repeating every
examination
Correct Answer: C. Applying the ALARA principle
Rationale: ALARA means keeping radiation exposure as low as
reasonably achievable while obtaining adequate diagnostic
information.
9. What does ALARA stand for?
A. As Low As Reasonably Achievable B. As Limited As Radiation
Allows C. Applied Levels Are Routinely Assessed D. Appropriate
Limits Are Required Always
Correct Answer: A. As Low As Reasonably Achievable
Rationale: ALARA is a radiation protection principle designed to
minimize unnecessary exposure to patients, workers, and the
public.
, 10. Which device restricts the size and shape of the X-ray
beam?
A. Grid B. Collimator C. Cassette D. Fluoroscope
Correct Answer: B. Collimator
Rationale: The collimator limits the X-ray field to the
anatomical area being examined, reducing unnecessary
exposure and scatter.
11. What is the primary purpose of an anti-scatter grid?
A. To increase image magnification B. To absorb scattered
radiation before it reaches the image receptor C. To increase
exposure time D. To reduce tube voltage
Correct Answer: B. To absorb scattered radiation before it
reaches the image receptor
Rationale: Grids improve image contrast by absorbing
scattered photons that would otherwise reach the image
receptor.
12. Which interaction is primarily responsible for producing
image contrast in diagnostic radiography?
A. Compton scattering only B. Photoelectric absorption C.
Nuclear fission D. Radioactive decay
Correct Answer: B. Photoelectric absorption
Rationale: Photoelectric absorption contributes to differential
absorption between tissues, helping create subject contrast.