QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) Q&A 2027|INSTANT DOWNLOAD PDF
1. What is the primary function of a lock?
A. To increase the weight of a door B. To control and restrict
unauthorized access C. To improve room ventilation D. To
prevent all forms of property damage
Correct answer: B. To control and restrict unauthorized access.
Rationale: A lock is a security device designed to restrict access
to authorized individuals. Its effectiveness depends on proper
installation, suitable hardware, key control, and maintenance.
2. Which component of a pin-tumbler lock contains the
keyway?
A. Plug B. Strike plate C. Deadbolt D. Spring housing
Correct answer: A. Plug.
Rationale: The plug is the rotating portion of the cylinder that
contains the keyway. When the correct key aligns the pin stacks
at the shear line, the plug can rotate.
3. What is the purpose of a shear line in a pin-tumbler lock?
A. To hold the lock against the door B. To separate the key from
the cylinder C. To provide a boundary that must be cleared for
plug rotation D. To prevent the key from entering the cylinder
,Correct answer: C. To provide a boundary that must be cleared
for plug rotation.
Rationale: The shear line is the boundary between the plug and
cylinder housing. Correct key insertion positions the pin stacks
so that their separation points align with this boundary.
4. Which component applies pressure to the driver pins in a
conventional pin-tumbler cylinder?
A. Springs B. Strike plate C. Cam D. Escutcheon
Correct answer: A. Springs.
Rationale: Springs push the driver pins downward into the plug
area. This prevents rotation when the correct key is not
inserted.
5. What is the main purpose of a deadbolt?
A. To automatically close a door B. To provide additional locking
security C. To support door hinges D. To reduce door noise
Correct answer: B. To provide additional locking security.
Rationale: A deadbolt extends a solid bolt into the strike or
door frame. It generally provides stronger resistance to forced
entry than a spring-latch mechanism.
6. What is a keyway?
A. The opening in a lock cylinder where the key is inserted B.
The metal plate surrounding a door C. The opening between
two hinges D. The area where a deadbolt enters the frame
,Correct answer: A. The opening in a lock cylinder where the
key is inserted.
Rationale: The keyway is the shaped opening that accepts a
compatible key. Its profile helps restrict which key blanks can
enter a particular cylinder.
7. Which tool is commonly used to measure the dimensions of
a key?
A. Pipe wrench B. Caliper C. Hammer drill D. Voltage tester
Correct answer: B. Caliper.
Rationale: A caliper measures dimensions such as key
thickness, blade width, and other small measurements.
Accurate measurements are important when duplicating or
identifying keys.
8. What is the primary purpose of a strike plate?
A. To protect and reinforce the area where the latch or bolt
enters the frame B. To hold the key inside the cylinder C. To
lubricate the lock D. To adjust the electrical voltage
Correct answer: A. To protect and reinforce the area where
the latch or bolt enters the frame.
Rationale: A strike plate is installed on the door frame. It
receives the latch or bolt and helps distribute forces applied to
the locking hardware.
, 9. Which material is commonly used to manufacture lock
components because of its corrosion resistance and
machinability?
A. Paper B. Brass C. Cardboard D. Rubber
Correct answer: B. Brass.
Rationale: Brass is widely used in lock cylinders, keys, and other
hardware because it is relatively easy to machine and offers
good corrosion resistance.
10. What should a locksmith do before beginning work on a
customer's locked property?
A. Immediately replace the lock B. Verify authorization and
ownership or lawful access C. Make an unauthorized duplicate
key D. Ignore the customer's identification
Correct answer: B. Verify authorization and ownership or
lawful access.
Rationale: Authorization verification protects customers,
property owners, and locksmiths. A locksmith should establish
that the requesting person has legitimate authority before
performing security-related work.
Section 2: Key Cutting and Key Identification
11. What is the purpose of a key blank?
A. To serve as an unfinished key for duplication B. To replace a
door hinge C. To reinforce a lock cylinder D. To operate an
alarm system