Pure Certified FlashArray Implementation Specialist
Practice Exam
1. An implementation engineer arrives to install a FlashArray//X at a
financial institution. The implementation workbook specifies two
independent power feeds, but the rack has only one available PDU.
What should the engineer do?
A) Connect both power supplies to the available PDU
B) Continue because FlashArray has redundant controllers
C) Stop and resolve the missing independent power feed before commissioning
D) Disable power redundancy monitoring
Answer:
C) Stop and resolve the missing independent power feed before
commissioning
Rationale:
Redundant power supplies do not provide source redundancy when both depend
on the same PDU. Site readiness must include verification of the required power
infrastructure.
2. A customer orders a FlashArray expansion shelf. During the site
survey, the engineer discovers insufficient rack space for the shelf and
required cable management. What is the best action?
A) Install the shelf partially outside the rack
B) Revise the rack plan and confirm adequate supported space before installation
C) Remove existing equipment without approval
D) Place the shelf directly on the data center floor
Answer:
B) Revise the rack plan and confirm adequate supported space before
installation
Rationale:
Rack planning must account for the hardware's rack-unit requirements, physical
support, access, and cable routing.
,3. A FlashArray deployment workbook lists management IP addresses
but omits subnet masks, gateways, and DNS information. What should
the engineer do?
A) Use default values
B) Configure random addresses temporarily
C) Skip management networking permanently
D) Obtain and validate the missing network parameters before configuration
Answer:
D) Obtain and validate the missing network parameters before
configuration
Rationale:
Complete, verified network information is essential for reliable management access
and integration.
4. An engineer discovers that a delivered FlashArray controller has
visible shipping damage. The installation is scheduled for completion
that evening. What is the most appropriate response?
A) Document the damage and engage the appropriate logistics or support
process before installing the component
B) Install it because the chassis appears intact
C) Repair the damaged component with locally available parts
D) Ignore the damage until after acceptance testing
Answer:
A) Document the damage and engage the appropriate logistics or support
process before installing the component
Rationale:
Physical damage can compromise equipment reliability and safety. A delivery
schedule does not justify installing questionable hardware.
,5. A customer plans to connect a new FlashArray to a Fibre Channel
SAN. The engineer finds that the switches lack enough available ports
for the approved redundant design. What should happen?
A) Connect every array port to one switch
B) Eliminate host multipathing
C) Resolve the SAN port-capacity shortage before implementing the approved
design
D) Connect the array only to the management network
Answer:
C) Resolve the SAN port-capacity shortage before implementing the
approved design
Rationale:
SAN readiness includes sufficient compatible ports, optics, and independent
connectivity paths.
6. A site survey identifies a rack with adequate free rack units but
insufficient remaining electrical capacity. Which conclusion is correct?
A) The site is ready because rack space is available
B) The installation is not ready until electrical capacity is verified and corrected
C) Power requirements apply only to expansion shelves
D) Power capacity can be determined after production cutover
Answer:
B) The installation is not ready until electrical capacity is verified and
corrected
Rationale:
Physical space and electrical capacity are separate readiness requirements.
7. A customer requests installation of a FlashArray in a rack with
uncertain floor-loading capacity. What should the implementation
engineer verify?
A) Only the controller weight
B) Only the rack height
, C) Only the shipping container dimensions
D) Total installed weight, rack specifications, and facility floor-loading limits
Answer:
D) Total installed weight, rack specifications, and facility floor-loading
limits
Rationale:
Structural planning must account for the complete loaded rack and applicable
facility limitations.
8. An engineer preparing a controller upgrade discovers that the
delivered replacement controllers have different part numbers from the
approved upgrade bill of materials. What should be done?
A) Verify compatibility and the approved upgrade configuration before proceeding
B) Install them because the connectors appear identical
C) Modify the hardware identification labels
D) Assume every controller generation is interchangeable
Answer:
A) Verify compatibility and the approved upgrade configuration before
proceeding
Rationale:
Hardware compatibility depends on supported generation, model, firmware, and
upgrade path, not physical resemblance alone.
9. A customer plans a non-disruptive controller upgrade while several
ESXi hosts have only one active storage path. What is the primary
concern?
A) The hosts have too much redundancy
B) Snapshot schedules may be delayed
C) A controller transition could interrupt access for hosts without a working
alternate path
D) The FlashArray management IP must be changed
Practice Exam
1. An implementation engineer arrives to install a FlashArray//X at a
financial institution. The implementation workbook specifies two
independent power feeds, but the rack has only one available PDU.
What should the engineer do?
A) Connect both power supplies to the available PDU
B) Continue because FlashArray has redundant controllers
C) Stop and resolve the missing independent power feed before commissioning
D) Disable power redundancy monitoring
Answer:
C) Stop and resolve the missing independent power feed before
commissioning
Rationale:
Redundant power supplies do not provide source redundancy when both depend
on the same PDU. Site readiness must include verification of the required power
infrastructure.
2. A customer orders a FlashArray expansion shelf. During the site
survey, the engineer discovers insufficient rack space for the shelf and
required cable management. What is the best action?
A) Install the shelf partially outside the rack
B) Revise the rack plan and confirm adequate supported space before installation
C) Remove existing equipment without approval
D) Place the shelf directly on the data center floor
Answer:
B) Revise the rack plan and confirm adequate supported space before
installation
Rationale:
Rack planning must account for the hardware's rack-unit requirements, physical
support, access, and cable routing.
,3. A FlashArray deployment workbook lists management IP addresses
but omits subnet masks, gateways, and DNS information. What should
the engineer do?
A) Use default values
B) Configure random addresses temporarily
C) Skip management networking permanently
D) Obtain and validate the missing network parameters before configuration
Answer:
D) Obtain and validate the missing network parameters before
configuration
Rationale:
Complete, verified network information is essential for reliable management access
and integration.
4. An engineer discovers that a delivered FlashArray controller has
visible shipping damage. The installation is scheduled for completion
that evening. What is the most appropriate response?
A) Document the damage and engage the appropriate logistics or support
process before installing the component
B) Install it because the chassis appears intact
C) Repair the damaged component with locally available parts
D) Ignore the damage until after acceptance testing
Answer:
A) Document the damage and engage the appropriate logistics or support
process before installing the component
Rationale:
Physical damage can compromise equipment reliability and safety. A delivery
schedule does not justify installing questionable hardware.
,5. A customer plans to connect a new FlashArray to a Fibre Channel
SAN. The engineer finds that the switches lack enough available ports
for the approved redundant design. What should happen?
A) Connect every array port to one switch
B) Eliminate host multipathing
C) Resolve the SAN port-capacity shortage before implementing the approved
design
D) Connect the array only to the management network
Answer:
C) Resolve the SAN port-capacity shortage before implementing the
approved design
Rationale:
SAN readiness includes sufficient compatible ports, optics, and independent
connectivity paths.
6. A site survey identifies a rack with adequate free rack units but
insufficient remaining electrical capacity. Which conclusion is correct?
A) The site is ready because rack space is available
B) The installation is not ready until electrical capacity is verified and corrected
C) Power requirements apply only to expansion shelves
D) Power capacity can be determined after production cutover
Answer:
B) The installation is not ready until electrical capacity is verified and
corrected
Rationale:
Physical space and electrical capacity are separate readiness requirements.
7. A customer requests installation of a FlashArray in a rack with
uncertain floor-loading capacity. What should the implementation
engineer verify?
A) Only the controller weight
B) Only the rack height
, C) Only the shipping container dimensions
D) Total installed weight, rack specifications, and facility floor-loading limits
Answer:
D) Total installed weight, rack specifications, and facility floor-loading
limits
Rationale:
Structural planning must account for the complete loaded rack and applicable
facility limitations.
8. An engineer preparing a controller upgrade discovers that the
delivered replacement controllers have different part numbers from the
approved upgrade bill of materials. What should be done?
A) Verify compatibility and the approved upgrade configuration before proceeding
B) Install them because the connectors appear identical
C) Modify the hardware identification labels
D) Assume every controller generation is interchangeable
Answer:
A) Verify compatibility and the approved upgrade configuration before
proceeding
Rationale:
Hardware compatibility depends on supported generation, model, firmware, and
upgrade path, not physical resemblance alone.
9. A customer plans a non-disruptive controller upgrade while several
ESXi hosts have only one active storage path. What is the primary
concern?
A) The hosts have too much redundancy
B) Snapshot schedules may be delayed
C) A controller transition could interrupt access for hosts without a working
alternate path
D) The FlashArray management IP must be changed
