AFAB 110 FINAL EXPECTED QUESTIONS WITH
VERIFIED ANSWERS
Question 1.
Which of the following is not an example of a spatial instrument?
ANSWER
playing 3d tic tac toe
Question 2.
There are three dimension terms common to drafting education. which of the following is not
correct?
ANSWER
Length
Question 3.
The type of section view where the section view is no longer aligned in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset
ANSWER
offset
Question 4.
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle, could be
better described with a ---- section.
ANSWER
Aligned
Question 5.
The broken-out section requires another type of line from the alphabet of lines to help show where
the removed portion was broken off in a jagged sort of way. this is the --- line.
ANSWER
, Short break
Question 6.
When a --- section is created, it can be overlaid on the view or short break lines can be used on each
side of th e view to seperate it from the other visible lines.
ANSWER
Revolved
Question 7.
Type of section wherein the section view is probably located out of projection with the other regular
or auxiliary views is a --- section.
ANSWER
Removed
Question 8.
There is a conventional practice that allows the drafter to leave a feature unhatched, even though
the cutting-plane line passes through it. Which of the following is not relevent to this conventional
practice?
ANSWER
Hole
Question 9.
If there is a large area that needs to receive section lines, the ____ section allows for the section lines
to only be applied around the perimeter.
ANSWER
outline
Question 10.
In assembly drawings, there may be some parts that do not receive section lines, but rather the area
cut by the cutting-plane line is filled-in solid. Which of the following is not relevant to this
conventional practice?
ANSWER
Springs
VERIFIED ANSWERS
Question 1.
Which of the following is not an example of a spatial instrument?
ANSWER
playing 3d tic tac toe
Question 2.
There are three dimension terms common to drafting education. which of the following is not
correct?
ANSWER
Length
Question 3.
The type of section view where the section view is no longer aligned in projection with other views is:
A. removed
B. revolved
C. broken-out
D. offset
ANSWER
offset
Question 4.
Cylindrical object with an odd number of features, such as spokes or holes on a bolt circle, could be
better described with a ---- section.
ANSWER
Aligned
Question 5.
The broken-out section requires another type of line from the alphabet of lines to help show where
the removed portion was broken off in a jagged sort of way. this is the --- line.
ANSWER
, Short break
Question 6.
When a --- section is created, it can be overlaid on the view or short break lines can be used on each
side of th e view to seperate it from the other visible lines.
ANSWER
Revolved
Question 7.
Type of section wherein the section view is probably located out of projection with the other regular
or auxiliary views is a --- section.
ANSWER
Removed
Question 8.
There is a conventional practice that allows the drafter to leave a feature unhatched, even though
the cutting-plane line passes through it. Which of the following is not relevent to this conventional
practice?
ANSWER
Hole
Question 9.
If there is a large area that needs to receive section lines, the ____ section allows for the section lines
to only be applied around the perimeter.
ANSWER
outline
Question 10.
In assembly drawings, there may be some parts that do not receive section lines, but rather the area
cut by the cutting-plane line is filled-in solid. Which of the following is not relevant to this
conventional practice?
ANSWER
Springs
