NM ES3J QUESTIONS AND ANSWERS
WITH COMPLETE SOLUTIONS
NFPA 72 - ANSWERS- fx fx fx
What is the NFPA code that refers to household firefighting equipment?
fx fx fx fx fx fx fx fx fx fx
22 (NEC 725.179 E) - ANSWERS-
fx fx fx fx fx
Type PLTC nonmetallic sheathed shall be a minimum size ___ gauge for class 3 circ
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
uits and have an insulation rating of atleast 300 V
fx fx fx fx fx fx fx fx fx
Grounding Connection - ANSWERS- fx fx fx
What is the function of a green wire in a manufactured home?
fx fx fx fx fx fx fx fx fx fx fx
2 Feet - ANSWERS-
fx fx fx
What is the minimum required clearance between a receiving antenna and 250 volt li
fx fx fx fx fx fx fx fx fx fx fx fx fx
ne not insulated?
fx fx
20 - ANSWERS- fx fx
What is the maximum number of supervisory switches permitted to be connected to a
fx fx fx fx fx fx fx fx fx fx fx fx fx f
actuate a single transmitter?
x fx fx fx
18 (NEC 725.179 H) - ANSWERS-
fx fx fx fx fx
According to NEC class 3 circuits are allowed a minimum wire size of what gauge?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
8 Feet
fx fx
NEC 250.5.2.5 - ANSWERS- fx fx fx
What is the minimum length of a grounding rod in an application of less than 50 volts?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
Wooden plugs - ANSWERS- fx fx fx
According to the NEC electrical equipment may not be mounted to concrete, cinder bl
fx fx fx fx fx fx fx fx fx fx fx fx fx
ock, or brick walls with one of these___.
fx fx fx fx fx fx fx
300
(NEC 800.179) - ANSWERS- fx fx fx
Communication cables shall have a voltage rating of not less than how many volts? fx fx fx fx fx fx fx fx fx fx fx fx fx
Connected fx
(NEC 550.16) - ANSWERS- fx fx fx
In a manufactured home the grounding bus shall be ___ through the green color insul
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
ated conductor in the supply cord or the feeder wiring to the service ground in the ser
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
vice equipment located adjacent to the mobile home.
fx fx fx fx fx fx fx
2 fx
(NFPA 72 18.5.2.1) - ANSWERS- fx fx fx fx
what is the maximum blink rate on a strobe light per second?
fx fx fx fx fx fx fx fx fx fx fx
10 foot gas pipe
fx fx fx
, (NEC 250.5.2 A) - ANSWERS-All of the following is acceptable as a ground except?
fx fx fx fx fx fx fx fx fx fx fx fx fx
1 1/4 inches
fx fx fx
(NEC 300.4 A 1) - ANSWERS-
fx fx fx fx fx
What is the minimum clearance to the edge of a wood stud for a wire hole?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
2 Feet
fx fx
(NEC 810.13) - ANSWERS-
fx fx fx
The minimum clearance for an antenna to other conductors is?
fx fx fx fx fx fx fx fx fx
2 - ANSWERS-A basic alarm system will have __ power sources
fx fx fx fx fx fx fx fx fx fx
60 Volts
fx fx
(NEC 820.15) - ANSWERS-What is the maximum voltage that coax cable can carry?
fx fx fx fx fx fx fx fx fx fx fx fx
50 Feet (NFPA 72 29.7.3.1) - ANSWERS-
fx fx fx fx fx fx
Heat detectors used within a family unit must be listed as or approved for not less tha
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
n ___ spacing?
fx fx
3 hours - ANSWERS-
fx fx fx
The NEC classifies Continuous Load as equipment running at a maximum load of __
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
____?
Class ll Division 1 fx fx fx
(NEC 500.5 C1) - ANSWERS-
fx fx fx fx
Determine the class and division for which location in which sufficient quantities of co
fx fx fx fx fx fx fx fx fx fx fx fx fx
mbustible dust are normally present in the air to produce explosive mixtures.
fx fx fx fx fx fx fx fx fx fx fx
On the centerline of a doorway - ANSWERS-
fx fx fx fx fx fx fx
Given: a smoke detection system is being installed to automatically close a double do
fx fx fx fx fx fx fx fx fx fx fx fx fx
orway in response to smoke blowing in either direction, the ceiling is smooth. Where
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
must the smoke detector be installed?
fx fx fx fx fx
Bottom of the beam - ANSWERS- fx fx fx fx fx
On a beam ceiling where the beams are less than 12 inches in depth and spacing is l
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
ess than 96 inches where should the smoke detectors be mounted?
fx fx fx fx fx fx fx fx fx fx
Safe Electrical Installation - ANSWERS-The purpose of NEC is to provide?
fx fx fx fx fx fx fx fx fx fx
Boxes or Junction Boxes - ANSWERS-
fx fx fx fx fx
Where are splices allowed in conductors in surface metal raceways if they do not hav
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
e removable covers?
fx fx
UF (NEC 340.10) - ANSWERS-What type of wire is used for common direct burial?
fx fx fx fx fx fx fx fx fx fx fx fx fx
2fx
NFPA 72 24.4.1.2.1 - ANSWERS-
fx fx fx fx
On a voice alarm system what is the minimum number of cycles it has to report an ev
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
acuation procedure? fx
WITH COMPLETE SOLUTIONS
NFPA 72 - ANSWERS- fx fx fx
What is the NFPA code that refers to household firefighting equipment?
fx fx fx fx fx fx fx fx fx fx
22 (NEC 725.179 E) - ANSWERS-
fx fx fx fx fx
Type PLTC nonmetallic sheathed shall be a minimum size ___ gauge for class 3 circ
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
uits and have an insulation rating of atleast 300 V
fx fx fx fx fx fx fx fx fx
Grounding Connection - ANSWERS- fx fx fx
What is the function of a green wire in a manufactured home?
fx fx fx fx fx fx fx fx fx fx fx
2 Feet - ANSWERS-
fx fx fx
What is the minimum required clearance between a receiving antenna and 250 volt li
fx fx fx fx fx fx fx fx fx fx fx fx fx
ne not insulated?
fx fx
20 - ANSWERS- fx fx
What is the maximum number of supervisory switches permitted to be connected to a
fx fx fx fx fx fx fx fx fx fx fx fx fx f
actuate a single transmitter?
x fx fx fx
18 (NEC 725.179 H) - ANSWERS-
fx fx fx fx fx
According to NEC class 3 circuits are allowed a minimum wire size of what gauge?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
8 Feet
fx fx
NEC 250.5.2.5 - ANSWERS- fx fx fx
What is the minimum length of a grounding rod in an application of less than 50 volts?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
Wooden plugs - ANSWERS- fx fx fx
According to the NEC electrical equipment may not be mounted to concrete, cinder bl
fx fx fx fx fx fx fx fx fx fx fx fx fx
ock, or brick walls with one of these___.
fx fx fx fx fx fx fx
300
(NEC 800.179) - ANSWERS- fx fx fx
Communication cables shall have a voltage rating of not less than how many volts? fx fx fx fx fx fx fx fx fx fx fx fx fx
Connected fx
(NEC 550.16) - ANSWERS- fx fx fx
In a manufactured home the grounding bus shall be ___ through the green color insul
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
ated conductor in the supply cord or the feeder wiring to the service ground in the ser
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
vice equipment located adjacent to the mobile home.
fx fx fx fx fx fx fx
2 fx
(NFPA 72 18.5.2.1) - ANSWERS- fx fx fx fx
what is the maximum blink rate on a strobe light per second?
fx fx fx fx fx fx fx fx fx fx fx
10 foot gas pipe
fx fx fx
, (NEC 250.5.2 A) - ANSWERS-All of the following is acceptable as a ground except?
fx fx fx fx fx fx fx fx fx fx fx fx fx
1 1/4 inches
fx fx fx
(NEC 300.4 A 1) - ANSWERS-
fx fx fx fx fx
What is the minimum clearance to the edge of a wood stud for a wire hole?
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
2 Feet
fx fx
(NEC 810.13) - ANSWERS-
fx fx fx
The minimum clearance for an antenna to other conductors is?
fx fx fx fx fx fx fx fx fx
2 - ANSWERS-A basic alarm system will have __ power sources
fx fx fx fx fx fx fx fx fx fx
60 Volts
fx fx
(NEC 820.15) - ANSWERS-What is the maximum voltage that coax cable can carry?
fx fx fx fx fx fx fx fx fx fx fx fx
50 Feet (NFPA 72 29.7.3.1) - ANSWERS-
fx fx fx fx fx fx
Heat detectors used within a family unit must be listed as or approved for not less tha
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
n ___ spacing?
fx fx
3 hours - ANSWERS-
fx fx fx
The NEC classifies Continuous Load as equipment running at a maximum load of __
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
____?
Class ll Division 1 fx fx fx
(NEC 500.5 C1) - ANSWERS-
fx fx fx fx
Determine the class and division for which location in which sufficient quantities of co
fx fx fx fx fx fx fx fx fx fx fx fx fx
mbustible dust are normally present in the air to produce explosive mixtures.
fx fx fx fx fx fx fx fx fx fx fx
On the centerline of a doorway - ANSWERS-
fx fx fx fx fx fx fx
Given: a smoke detection system is being installed to automatically close a double do
fx fx fx fx fx fx fx fx fx fx fx fx fx
orway in response to smoke blowing in either direction, the ceiling is smooth. Where
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
must the smoke detector be installed?
fx fx fx fx fx
Bottom of the beam - ANSWERS- fx fx fx fx fx
On a beam ceiling where the beams are less than 12 inches in depth and spacing is l
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
ess than 96 inches where should the smoke detectors be mounted?
fx fx fx fx fx fx fx fx fx fx
Safe Electrical Installation - ANSWERS-The purpose of NEC is to provide?
fx fx fx fx fx fx fx fx fx fx
Boxes or Junction Boxes - ANSWERS-
fx fx fx fx fx
Where are splices allowed in conductors in surface metal raceways if they do not hav
fx fx fx fx fx fx fx fx fx fx fx fx fx fx
e removable covers?
fx fx
UF (NEC 340.10) - ANSWERS-What type of wire is used for common direct burial?
fx fx fx fx fx fx fx fx fx fx fx fx fx
2fx
NFPA 72 24.4.1.2.1 - ANSWERS-
fx fx fx fx
On a voice alarm system what is the minimum number of cycles it has to report an ev
fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx fx
acuation procedure? fx