MSSC: Quality - Precision management tools
Question 1.
Which of the following measurement tools should be selected to measure a part that has a length specification of 1.625 inches +/-
0.005? A. 6 inch ruler B. Protractor C. Micrometer D. CAD system
ANSWER
C. Micrometer
Question 2.
The digital caliper's _______ house is the digital display. A. Outside jaws B. Carriage C. Computer port D. Locking screw
ANSWER
B. Carriage
Question 3.
The measuring tool shown is a ____. A. Depth caliper B. Hole gauge C. Depth micrometer D. Width micrometer
ANSWER
C. Depth micrometer
Question 4.
The typical accuracy of a dial caliper is about _____. A. 0.001 B. 0.003 C. 0.03 D. 0.01
ANSWER
B. 0.003
Question 5.
A measurement made with a precision measurement tool can be as precise as ______. A. 0.01 inches B. 0.5 mm C. 0.001 inches D.
0.005 inches
ANSWER
C. 0.001 inches
Question 6.
The reading on the 3-4 micrometer indicates a measurement of _____ inches. A. 3.6375 B. 3.532 C. 3.6355 D. 3.625
ANSWER
A. 3.6375
Question 7.
The two outside jaws of a ____ are only used to measure the outside dimensions of parts. A. Micrometer B. Digital caliper C. Dial
caliper D. Digital and dial caliper
ANSWER
D. Digital and dial caliper
1/3
Question 1.
Which of the following measurement tools should be selected to measure a part that has a length specification of 1.625 inches +/-
0.005? A. 6 inch ruler B. Protractor C. Micrometer D. CAD system
ANSWER
C. Micrometer
Question 2.
The digital caliper's _______ house is the digital display. A. Outside jaws B. Carriage C. Computer port D. Locking screw
ANSWER
B. Carriage
Question 3.
The measuring tool shown is a ____. A. Depth caliper B. Hole gauge C. Depth micrometer D. Width micrometer
ANSWER
C. Depth micrometer
Question 4.
The typical accuracy of a dial caliper is about _____. A. 0.001 B. 0.003 C. 0.03 D. 0.01
ANSWER
B. 0.003
Question 5.
A measurement made with a precision measurement tool can be as precise as ______. A. 0.01 inches B. 0.5 mm C. 0.001 inches D.
0.005 inches
ANSWER
C. 0.001 inches
Question 6.
The reading on the 3-4 micrometer indicates a measurement of _____ inches. A. 3.6375 B. 3.532 C. 3.6355 D. 3.625
ANSWER
A. 3.6375
Question 7.
The two outside jaws of a ____ are only used to measure the outside dimensions of parts. A. Micrometer B. Digital caliper C. Dial
caliper D. Digital and dial caliper
ANSWER
D. Digital and dial caliper
1/3
