ARFF
COMPLETE QUESTION SET WITH VERIFIED
SOLUTIONS GRADED A+
Question 1.
As part of the weekly inspection the foam transfer pump should be operated for ____ seconds to check
for proper operation.
ANSWER
10 seconds
Question 2.
The correct steps to making a turn on a improved surface are (below is a random order)
1. Check to see if the area is clear of moving vehicles or aircraft
2. Activate the appropriate turn signal
3. Safely make the turn
4. Move apparatus into turning lane
5. Check the side mirrors
ANSWER
The correct order is (top-bottom = left-right)
2,5,4,1,3
Question 3.
Definition of expansion ratio
ANSWER
If the solution temperature is higher than 70°F no correction applies. If the temperature is
lower than 70°F add 0.1 unit of expansion for each 3°F below 70°F
Question 4.
To turn a ARFF apparatus
ANSWER
Decelerate before the turn, turn, and then accelerate.
, Question 5.
Items inspected on a periodic basis are usually performed every ___ - ___ __________?
ANSWER
4 - 12 months
Question 6.
All of the following statements about parking a apparatus near a railroad are true EXCEPT
1. Do not park on the tracks
2. park on the opposite side of the tracks at a incident
3. Park far enough away from the railroad tracks so that you don't block traffic
4. Never park close enough to the tracks, that the apparatus could be hit by a passing train
ANSWER
2. Park on the opposite side of the tracks at a incident
Question 7.
The FIRST step for conducting the turret ground pattern test is
ANSWER
Discharge the foam onto a paved surface for 30 seconds at the specified pressure in both the
straight stream and fully dispersed nozzle settings
Question 8.
When approaching a side trade in a ARFF apparatus it would be best to
ANSWER
Approach from an angle
Question 9.
When approaching an intersection with a stop sign; you should?
ANSWER
smoothly decelerate and bring your apparatus to a compete stop
COMPLETE QUESTION SET WITH VERIFIED
SOLUTIONS GRADED A+
Question 1.
As part of the weekly inspection the foam transfer pump should be operated for ____ seconds to check
for proper operation.
ANSWER
10 seconds
Question 2.
The correct steps to making a turn on a improved surface are (below is a random order)
1. Check to see if the area is clear of moving vehicles or aircraft
2. Activate the appropriate turn signal
3. Safely make the turn
4. Move apparatus into turning lane
5. Check the side mirrors
ANSWER
The correct order is (top-bottom = left-right)
2,5,4,1,3
Question 3.
Definition of expansion ratio
ANSWER
If the solution temperature is higher than 70°F no correction applies. If the temperature is
lower than 70°F add 0.1 unit of expansion for each 3°F below 70°F
Question 4.
To turn a ARFF apparatus
ANSWER
Decelerate before the turn, turn, and then accelerate.
, Question 5.
Items inspected on a periodic basis are usually performed every ___ - ___ __________?
ANSWER
4 - 12 months
Question 6.
All of the following statements about parking a apparatus near a railroad are true EXCEPT
1. Do not park on the tracks
2. park on the opposite side of the tracks at a incident
3. Park far enough away from the railroad tracks so that you don't block traffic
4. Never park close enough to the tracks, that the apparatus could be hit by a passing train
ANSWER
2. Park on the opposite side of the tracks at a incident
Question 7.
The FIRST step for conducting the turret ground pattern test is
ANSWER
Discharge the foam onto a paved surface for 30 seconds at the specified pressure in both the
straight stream and fully dispersed nozzle settings
Question 8.
When approaching a side trade in a ARFF apparatus it would be best to
ANSWER
Approach from an angle
Question 9.
When approaching an intersection with a stop sign; you should?
ANSWER
smoothly decelerate and bring your apparatus to a compete stop
