Engine_Repair_Michigan_Mechanic_Actual_Exam_Paper_2026_Questions.pdf

ENGINE REPAIR MICHIGAN MECHANIC
PREMIUM TEST BANK WITH EXPERT
SOLUTIONS



◉ YOU HAVE FINISHED GRINDING AN EXHAUST VALVE.
WHAT SHOULD THE MARGIN BE. Answer: 001"-.003"


◉ THE CAR HAS A WATER PUMP MOUNTED FAN. YOU NOTICE
THAT THE FAN BLADE TIPS MOVE BETWEEN ONE-EIGHT AND
ONE QUARTER INCH BACK AND FORTH. WHAT DOES THIS
INDICATE. Answer: A BADLY WORN WATER PUMP BEARING


◉ THE BEST TIME TO CHECK FOR CRANKSHAFT ENDPLAY IS
AFTER. Answer: TORQUING THE MANI BEARING CAPS


◉ CRANKSHAFT ENDPLAY CAN BE CHECKED WITH. Answer: A
DIAL INDICATOR


◉ THE PICTURE BELOW SHOWS A MECAHINIC MEASURING.
Answer: A. VALVE GUIDE WEAR.
B. VALVE CONCENTRICITY.
C. VALVE MARGIN. (NOT CORRECT AWNSER)

, D. VALVE ROTATION.


◉ YOU ARE PERFORMING A COMPRESSION TEST. WHICH ONE
OF THE FOLLOWING IS TRUE. Answer: THE THROTTLE AND
CHOKE MUST BE OPENED FULLY.


◉ WHICH ONE OF THE FOLLOWING IS A SAE GRADE 5 BOLT.
Answer: C


◉ CYLINDER DIAMETER IS IMPORTANT WHEN DETERMINING
RING END GAP. AS A RULE OF THUMB, A 3 INCH BORE WOULD
REQUIRE A RING END GAP OF APPROXIMATELY. Answer: .009"-
.012"


◉ PISTON RINGS SHOULD BE CHECKED FOR FIT. Answer: IN
THE PISTON RING GROOVES
IN THE CYLINDER


◉ WHEN PUTTING AN ENGINE TOGEATHER, YOU WOULD USE
SHORT PIECES OF HOSE TO PROTECT THE. Answer: ROD
JOURNALS


◉ WHICH ONE OF THE FOLLOWING WILL CAUSE OIL
CONSUMPTION. Answer: EXCESSIVE MAIN BEARING
CLEARANCE