AVIXA CTS Sample Questions
comprehensive Questions and Answers
with Verified Solutions
Question 1:
What is the BEST way to determine how reverberant a space is? -Clap
your hands and listen for an echo -Ask the client if anyone has
complained that the room is too noisy -Use an RT60 meter -Use a DB
SPL meter
Answer:
Use an RT60 meter
Question 2:
Site survey
Answer:
The correct time to discuss visible finishes for wall plates, surface mount
speakers, and wall mounted screen casings is during the: -Ordering
-Installation -Site survey -Contract award
Question 3:
While surveying a conference room for a system upgrade, an engineer
measures 55 dB SPL A-wtd of ambient noise when the room is empty.
How should they proceed? -Add voice lift to the system proposal -Add
more loudspeakers to the system proposal -Speak with the client about
getting more information on how to address the noise source -Do nothing,
this level of ambient noise is well within system tolerance
Answer:
Speak with the client about getting more information on how to address
the noise source
,Question 4:
A client needs to add videoconferencing functionality for high-level,
private meetings. Which of following planned space types should you
advise be ruled out? -Divisible room -Boardroom -Conference room
-Classroom
Answer:
Divisible room
Question 5:
Which phase of an AV project comes immediately AFTER the Program
Phase? -The Design Phase -Project Planning and Coordination Phase
-The Verification Phase -The Documentation Phase
Answer:
The Design Phase
Question 6:
Which is NOT presented in the program report: -Executive Summary
-Detailed list of equipment -Budgets -Infrastructure Considerations
Answer:
Detailed list of equipment
,Question 7:
When preparing an executive summary what should be included for
submittal to the client? -A deep dive, including full technical specficiation,
of all equipment to be used in the design. -An estimation of how many
change orders might be required if the client doesn't use your design.
-References to new and emerging technologies that should be
considered for future spaces. -An overview of the programming process
including who was surveyed during the process.
Answer:
An overview of the programming process including who was surveyed
during the process.
Question 8:
Which system is used to show colors from a video display? -Additive
color system -Subtractive color system -Plus/minus color system
-Recover color system
Answer:
Additive color system
Question 9:
An installed audio system should be AT LEAST __________ above the
ambient noise floor. -5 dB -25 dB -45 dB -75 dB
Answer:
25 db
Question 10:
A device is controlled using the pictured cable. What is the MOST
LIKELY method of controlling this device? -IR -RF -RS-232 -Network
Answer:
RS-232
, Question 11:
5:1
Answer:
The minimum load safety rating for mounting audio visual equipment is:
-3:1 -5:1 -8:1 -10:1
Question 12:
As part of regular system maintenance, when is the BEST time to update
device firmware? -On Friday afternoons. -As soon as updates are
available. -Device firmware should never be updated after system
sign-off. -After coordination with the client, and when the system will be
available for an extended period of time
Answer:
On Friday afternoons.
Question 13:
The brightness controls on a display adjusts which level? -Black Level
-Chroma Level -Hue -White Level
Answer:
Black Level
Question 14:
determine if it meets a specified contrast ratio? -Multi-meter -Histogram
-Lux Capacitor -Spot Photometer
Answer:
Spot Photometer When verifying a display system, which of the following
should be used to
comprehensive Questions and Answers
with Verified Solutions
Question 1:
What is the BEST way to determine how reverberant a space is? -Clap
your hands and listen for an echo -Ask the client if anyone has
complained that the room is too noisy -Use an RT60 meter -Use a DB
SPL meter
Answer:
Use an RT60 meter
Question 2:
Site survey
Answer:
The correct time to discuss visible finishes for wall plates, surface mount
speakers, and wall mounted screen casings is during the: -Ordering
-Installation -Site survey -Contract award
Question 3:
While surveying a conference room for a system upgrade, an engineer
measures 55 dB SPL A-wtd of ambient noise when the room is empty.
How should they proceed? -Add voice lift to the system proposal -Add
more loudspeakers to the system proposal -Speak with the client about
getting more information on how to address the noise source -Do nothing,
this level of ambient noise is well within system tolerance
Answer:
Speak with the client about getting more information on how to address
the noise source
,Question 4:
A client needs to add videoconferencing functionality for high-level,
private meetings. Which of following planned space types should you
advise be ruled out? -Divisible room -Boardroom -Conference room
-Classroom
Answer:
Divisible room
Question 5:
Which phase of an AV project comes immediately AFTER the Program
Phase? -The Design Phase -Project Planning and Coordination Phase
-The Verification Phase -The Documentation Phase
Answer:
The Design Phase
Question 6:
Which is NOT presented in the program report: -Executive Summary
-Detailed list of equipment -Budgets -Infrastructure Considerations
Answer:
Detailed list of equipment
,Question 7:
When preparing an executive summary what should be included for
submittal to the client? -A deep dive, including full technical specficiation,
of all equipment to be used in the design. -An estimation of how many
change orders might be required if the client doesn't use your design.
-References to new and emerging technologies that should be
considered for future spaces. -An overview of the programming process
including who was surveyed during the process.
Answer:
An overview of the programming process including who was surveyed
during the process.
Question 8:
Which system is used to show colors from a video display? -Additive
color system -Subtractive color system -Plus/minus color system
-Recover color system
Answer:
Additive color system
Question 9:
An installed audio system should be AT LEAST __________ above the
ambient noise floor. -5 dB -25 dB -45 dB -75 dB
Answer:
25 db
Question 10:
A device is controlled using the pictured cable. What is the MOST
LIKELY method of controlling this device? -IR -RF -RS-232 -Network
Answer:
RS-232
, Question 11:
5:1
Answer:
The minimum load safety rating for mounting audio visual equipment is:
-3:1 -5:1 -8:1 -10:1
Question 12:
As part of regular system maintenance, when is the BEST time to update
device firmware? -On Friday afternoons. -As soon as updates are
available. -Device firmware should never be updated after system
sign-off. -After coordination with the client, and when the system will be
available for an extended period of time
Answer:
On Friday afternoons.
Question 13:
The brightness controls on a display adjusts which level? -Black Level
-Chroma Level -Hue -White Level
Answer:
Black Level
Question 14:
determine if it meets a specified contrast ratio? -Multi-meter -Histogram
-Lux Capacitor -Spot Photometer
Answer:
Spot Photometer When verifying a display system, which of the following
should be used to
