NACE CIP 1 CBT Exam – Questions & Accurate
Solutions
Add to calendar
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (203)
How is the process of steel corrosion electrochemical
ALWAYS described?
Based on the galvanic series zinc, aluminum, magnesium
presented in the NACE CIP Level 1
Manual, which three can be used
effectively as galvanic anodes for
carbon steel?
A decrease in temperature will decrease
generally cause the corrosion rate to
_____
The electrolyte is a medium which Ionic
carries the following type of current?
,Corrosion occurring uniformly across a general corrosion
surface is called _____
When a conflict occurs on a coatings actively listen and endeavor to understand the
project, as the inspector, the preferred positions of others
first course of action is to _____
A proper coating specification should surface preparation standards, safety, and locations to
contain information regarding ____, ____, be used
and ____
Is it ever okay to accept a gift from a NO
contractor?
What should you do if you find seek written clarification from the owner's
discrepancies between the representative
specification and the coating
manufacturer's technical data sheet?
What are the general components of - results of inspection tests
inspection reports? - location(s) of work
- details of preparation and application
Inspection reports typically provide - contractor's performance
sufficient detail permitting the owner - inspector's performance
to evaluate ___ ___ ___ ___ - job progress
- work interruptions
As an inspector headed to the job site Safety Data Sheet (SDS), previously called MSDS
for the first time, where would you
always find instruction regarding
appropriate types of PPE?
, Materials inventory report should - quantity of each component of each material onsite
contain which of the following? - material batch numbers
- date of materials arrival at job site and storage
information
The primary function of the coating specification compliance
inspector is _____
High humidity in the air during coating solvent entrapment
application can cause _____
The temperature at which moisture dew point
condenses on a surface is called _____
Where should the steel surface at the actual work location
temperature reading be taken?
What type of water should be added distilled
to a sling psychrometer?
Which type of coating is manufactured inhibitive
with the specific components added to
slow down the activity of the
electrochemical cell?
Which coating component forms a binder/resin
stable film that retains its characteristic
properties?
A barrier coating interrupts the ______ of electrolyte
the electrochemical cell.
List the three mechanisms by which 1. Polar
coatings adhere to a substrate 2. Chemical
3. Mechanical
Solutions
Add to calendar
Play your way to mastery with fun games
Match Blocks Charms NEW
Terms in this set (203)
How is the process of steel corrosion electrochemical
ALWAYS described?
Based on the galvanic series zinc, aluminum, magnesium
presented in the NACE CIP Level 1
Manual, which three can be used
effectively as galvanic anodes for
carbon steel?
A decrease in temperature will decrease
generally cause the corrosion rate to
_____
The electrolyte is a medium which Ionic
carries the following type of current?
,Corrosion occurring uniformly across a general corrosion
surface is called _____
When a conflict occurs on a coatings actively listen and endeavor to understand the
project, as the inspector, the preferred positions of others
first course of action is to _____
A proper coating specification should surface preparation standards, safety, and locations to
contain information regarding ____, ____, be used
and ____
Is it ever okay to accept a gift from a NO
contractor?
What should you do if you find seek written clarification from the owner's
discrepancies between the representative
specification and the coating
manufacturer's technical data sheet?
What are the general components of - results of inspection tests
inspection reports? - location(s) of work
- details of preparation and application
Inspection reports typically provide - contractor's performance
sufficient detail permitting the owner - inspector's performance
to evaluate ___ ___ ___ ___ - job progress
- work interruptions
As an inspector headed to the job site Safety Data Sheet (SDS), previously called MSDS
for the first time, where would you
always find instruction regarding
appropriate types of PPE?
, Materials inventory report should - quantity of each component of each material onsite
contain which of the following? - material batch numbers
- date of materials arrival at job site and storage
information
The primary function of the coating specification compliance
inspector is _____
High humidity in the air during coating solvent entrapment
application can cause _____
The temperature at which moisture dew point
condenses on a surface is called _____
Where should the steel surface at the actual work location
temperature reading be taken?
What type of water should be added distilled
to a sling psychrometer?
Which type of coating is manufactured inhibitive
with the specific components added to
slow down the activity of the
electrochemical cell?
Which coating component forms a binder/resin
stable film that retains its characteristic
properties?
A barrier coating interrupts the ______ of electrolyte
the electrochemical cell.
List the three mechanisms by which 1. Polar
coatings adhere to a substrate 2. Chemical
3. Mechanical
