NACE CIP 1 CBT EXAM (QUIZZES AND
STUDY QUESTIONS AND ANSWERS
How is the process of steel corrosion ALWAYS described? - ANSWERS-
in in in in in in in in in in
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which thre
in in in in in in in in in in in in in in
e can be used effectively as galvanic anodes for carbon steel? - ANSWERS-
in in in in in in in in in in in in
zinc, aluminum, magnesium in in
A decrease in temperature will generally cause the corrosion rate to _____ -
in in in in in in in in in in in in
ANSWERS-decrease
in
The electrolyte is a medium which carries the following type of current? - ANSWERS-
in in in in in in in in in in in in in
Ionic
Corrosion occurring uniformly across a surface is called _____ - ANSWERS-
in in in in in in in in in in
general corrosion in
When a conflict occurs on a coatings project, as the inspector, the preferred first cour
in in in in in in in in in in in in in in
se of action is to _____ - ANSWERS-
in in in in in in in
actively listen and endeavor to understand the positions of others
in in in in in in in in in
A proper coating specification should contain information regarding ____, ____, and
in in in in in in in in in in in
____ - ANSWERS-surface preparation standards, safety, and locations to be used
in in in in in in in in in in
Is it ever okay to accept a gift from a contractor? - ANSWERS-NO
in in in in in in in in in in in in
What should you do if you find discrepancies between the specification and the coati
in in in in in in in in in in in in in
ng manufacturer's technical data sheet? - ANSWERS-
in in in in in in
seek written clarification from the owner's representative
in in in in in in
What are the general components of inspection reports? - ANSWERS--
in in in in in in in in in
results of inspection tests
in in in in in
- location(s) of work
in in in
- details of preparation and application
in in in in in
Inspection reports typically provide sufficient detail permitting the owner to evaluate _
in in in in in in in in in in in
__ ___ ___ ___ - ANSWERS-- contractor's performance
in in in in in in in in
- inspector's performance
in in
- job progress
in in
- work interruptions
in in
As an inspector headed to the job site for the first time, where would you always find i
in in in in in in in in in in in in in in in in in
nstruction regarding appropriate types of PPE? - ANSWERS- in in in in in in in
Safety Data Sheet (SDS), previously called MSDS
in in in in in in
,Materials inventory report should contain which of the following? - ANSWERS--
in in in in in in in in in in
quantity of each component of each material onsite
in in in in in in in in
- material batch numbers
in in in in
- date of materials arrival at job site and storage information
in in in in in in in in in in
The primary function of the coating inspector is _____ - ANSWERS-
in in in in in in in in in in
specification compliance in
High humidity in the air during coating application can cause _____ - ANSWERS-
in in in in in in in in in in in in
solvent entrapment in
The temperature at which moisture condenses on a surface is called _____ -
in in in in in in in in in in in in
ANSWERS-dew point
in in
Where should the steel surface temperature reading be taken? - ANSWERS-
in in in in in in in in in in
at the actual work location
in in in in
What type of water should be added to a sling psychrometer? - ANSWERS-distilled
in in in in in in in in in in in in
Which type of coating is manufactured with the specific components added to slow do
in in in in in in in in in in in in in
wn the activity of the electrochemical cell? - ANSWERS-inhibitive
in in in in in in in in
Which coating component forms a stable film that retains its characteristic properties
in in in in in in in in in in in
? - ANSWERS-binder/resin
in in
A barrier coating interrupts the ______ of the electrochemical cell. - ANSWERS-
in in in in in in in in in in in
electrolyte
List the three mechanisms by which coatings adhere to a substrate - ANSWERS-
in in in in in in in in in in in in
1. Polar in in
2. Chemicalin
3. Mechanical
in
What is the rule for coating work when it comes to Dew Point and Steel Temperature
in in in in in in in in in in in in in in in
? - ANSWERS-Steel Temperature must be 5 degrees less than the Dew Point
in in in in in in in in in in in in
What characteristics of solvents influence coatings? - ANSWERS-- solvency power
in in in in in in in in in in
- volatility
in
The contractor's sling psychrometer gives a different reading than your electric hygro
in in in in in in in in in in in
meter. What would you do first as an inspector? - ANSWERS-
in in in in in in in in in in
verify calibration of both instruments
in in in in
Which of the following coating are co-reacting? - ANSWERS-- polyurethane
in in in in in in in in in in
- epoxy
in
Fusion Bond Epoxy (FBE) is most commonly used to coat ____ - ANSWERS-pipe
in in in in in in in in in in in in
Which coatings may require external moisture to cure? - ANSWERS--
in in in in in in in in in
single component polyurethane
in in in
, - solvent borne inorganic zinc
in in in in
Amine blush is likely to occur with which type of coating? - ANSWERS-epoxy
in in in in in in in in in in in in
Which type of coating cures the fastest? - ANSWERS-Polyurea
in in in in in in in in
When an inorganic Zinc Rich primer is applied too heavily a common result is ______
in in in in in in in in in in in in in in i
- ANSWERS-mud cracking
n in in
Commonly used primers for steel structures are ? - ANSWERS-- epoxy
in in in in in in in in in in in
- inorganic zinc
in in in
- organic zinc
in in
Coatings that cure by polymerization are _____ - ANSWERS-convertible
in in in in in in in in
Water-borne latex coatings cure by a process known as _____ - ANSWERS- in in in in in in in in in in in
coalescence
On a blast-cleaned surface, ultraviolet ligt can reveal _____ - ANSWERS-oil
in in in in in in in in in in
You are an inspector on a project with a sprayed polyurethane coating. The probable
in in in in in in in in in in in in in in
safety concern is _______ - ANSWERS-isocyanates
in in in in in
The requirements of a coatings project are defined by which document? -
in in in in in in in in in in in
ANSWERS-coating specification
in in
A prejob conference is useful for discussions on which of the following? -
in in in in in in in in in in in in
ANSWERS-- safety
in in
- cleaning
in in
- application
in in
- schedule
in
You are the inspector on a project where the specified level of cleanliness is "near wh
in in in in in in in in in in in in in in in
ite". Which standard would you follow? - ANSWERS-NACE No. 2 / SSPC-SP 10
in in in in in in in in in in in in
The power tool standard for cleaning to bare metal with minimum profile of 1 Mil (25.4
in in in in in in in in in in in in in in in i
microns) is ______ - ANSWERS-SSPC-SP 11
n in in in in in
What is referenced by ISO 8503? - ANSWERS-Grit and Shot profile comparators
in in in in in in in in in in in
List the reasons that mill scale is typically removed: - ANSWERS--
in in in in in in in in in in
to avoid future delamination
in in in in in
- to improve coating adhesion
in in in in in
- to eliminate a source of galvanic corrosion
in in in in in in in
Which standard defines a "commercially" blast cleaned surface? - ANSWERS-
in in in in in in in in in
NACE No. 3 / SSPC-SP 6 in in in in in
ISO SA 2-1/2 is a blast cleaning surface that is similar to which joint standard? -
in in in in in in in in in in in in in in in
ANSWERS-NACE No. 2 / SP 10
in in in in in in
STUDY QUESTIONS AND ANSWERS
How is the process of steel corrosion ALWAYS described? - ANSWERS-
in in in in in in in in in in
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which thre
in in in in in in in in in in in in in in
e can be used effectively as galvanic anodes for carbon steel? - ANSWERS-
in in in in in in in in in in in in
zinc, aluminum, magnesium in in
A decrease in temperature will generally cause the corrosion rate to _____ -
in in in in in in in in in in in in
ANSWERS-decrease
in
The electrolyte is a medium which carries the following type of current? - ANSWERS-
in in in in in in in in in in in in in
Ionic
Corrosion occurring uniformly across a surface is called _____ - ANSWERS-
in in in in in in in in in in
general corrosion in
When a conflict occurs on a coatings project, as the inspector, the preferred first cour
in in in in in in in in in in in in in in
se of action is to _____ - ANSWERS-
in in in in in in in
actively listen and endeavor to understand the positions of others
in in in in in in in in in
A proper coating specification should contain information regarding ____, ____, and
in in in in in in in in in in in
____ - ANSWERS-surface preparation standards, safety, and locations to be used
in in in in in in in in in in
Is it ever okay to accept a gift from a contractor? - ANSWERS-NO
in in in in in in in in in in in in
What should you do if you find discrepancies between the specification and the coati
in in in in in in in in in in in in in
ng manufacturer's technical data sheet? - ANSWERS-
in in in in in in
seek written clarification from the owner's representative
in in in in in in
What are the general components of inspection reports? - ANSWERS--
in in in in in in in in in
results of inspection tests
in in in in in
- location(s) of work
in in in
- details of preparation and application
in in in in in
Inspection reports typically provide sufficient detail permitting the owner to evaluate _
in in in in in in in in in in in
__ ___ ___ ___ - ANSWERS-- contractor's performance
in in in in in in in in
- inspector's performance
in in
- job progress
in in
- work interruptions
in in
As an inspector headed to the job site for the first time, where would you always find i
in in in in in in in in in in in in in in in in in
nstruction regarding appropriate types of PPE? - ANSWERS- in in in in in in in
Safety Data Sheet (SDS), previously called MSDS
in in in in in in
,Materials inventory report should contain which of the following? - ANSWERS--
in in in in in in in in in in
quantity of each component of each material onsite
in in in in in in in in
- material batch numbers
in in in in
- date of materials arrival at job site and storage information
in in in in in in in in in in
The primary function of the coating inspector is _____ - ANSWERS-
in in in in in in in in in in
specification compliance in
High humidity in the air during coating application can cause _____ - ANSWERS-
in in in in in in in in in in in in
solvent entrapment in
The temperature at which moisture condenses on a surface is called _____ -
in in in in in in in in in in in in
ANSWERS-dew point
in in
Where should the steel surface temperature reading be taken? - ANSWERS-
in in in in in in in in in in
at the actual work location
in in in in
What type of water should be added to a sling psychrometer? - ANSWERS-distilled
in in in in in in in in in in in in
Which type of coating is manufactured with the specific components added to slow do
in in in in in in in in in in in in in
wn the activity of the electrochemical cell? - ANSWERS-inhibitive
in in in in in in in in
Which coating component forms a stable film that retains its characteristic properties
in in in in in in in in in in in
? - ANSWERS-binder/resin
in in
A barrier coating interrupts the ______ of the electrochemical cell. - ANSWERS-
in in in in in in in in in in in
electrolyte
List the three mechanisms by which coatings adhere to a substrate - ANSWERS-
in in in in in in in in in in in in
1. Polar in in
2. Chemicalin
3. Mechanical
in
What is the rule for coating work when it comes to Dew Point and Steel Temperature
in in in in in in in in in in in in in in in
? - ANSWERS-Steel Temperature must be 5 degrees less than the Dew Point
in in in in in in in in in in in in
What characteristics of solvents influence coatings? - ANSWERS-- solvency power
in in in in in in in in in in
- volatility
in
The contractor's sling psychrometer gives a different reading than your electric hygro
in in in in in in in in in in in
meter. What would you do first as an inspector? - ANSWERS-
in in in in in in in in in in
verify calibration of both instruments
in in in in
Which of the following coating are co-reacting? - ANSWERS-- polyurethane
in in in in in in in in in in
- epoxy
in
Fusion Bond Epoxy (FBE) is most commonly used to coat ____ - ANSWERS-pipe
in in in in in in in in in in in in
Which coatings may require external moisture to cure? - ANSWERS--
in in in in in in in in in
single component polyurethane
in in in
, - solvent borne inorganic zinc
in in in in
Amine blush is likely to occur with which type of coating? - ANSWERS-epoxy
in in in in in in in in in in in in
Which type of coating cures the fastest? - ANSWERS-Polyurea
in in in in in in in in
When an inorganic Zinc Rich primer is applied too heavily a common result is ______
in in in in in in in in in in in in in in i
- ANSWERS-mud cracking
n in in
Commonly used primers for steel structures are ? - ANSWERS-- epoxy
in in in in in in in in in in in
- inorganic zinc
in in in
- organic zinc
in in
Coatings that cure by polymerization are _____ - ANSWERS-convertible
in in in in in in in in
Water-borne latex coatings cure by a process known as _____ - ANSWERS- in in in in in in in in in in in
coalescence
On a blast-cleaned surface, ultraviolet ligt can reveal _____ - ANSWERS-oil
in in in in in in in in in in
You are an inspector on a project with a sprayed polyurethane coating. The probable
in in in in in in in in in in in in in in
safety concern is _______ - ANSWERS-isocyanates
in in in in in
The requirements of a coatings project are defined by which document? -
in in in in in in in in in in in
ANSWERS-coating specification
in in
A prejob conference is useful for discussions on which of the following? -
in in in in in in in in in in in in
ANSWERS-- safety
in in
- cleaning
in in
- application
in in
- schedule
in
You are the inspector on a project where the specified level of cleanliness is "near wh
in in in in in in in in in in in in in in in
ite". Which standard would you follow? - ANSWERS-NACE No. 2 / SSPC-SP 10
in in in in in in in in in in in in
The power tool standard for cleaning to bare metal with minimum profile of 1 Mil (25.4
in in in in in in in in in in in in in in in i
microns) is ______ - ANSWERS-SSPC-SP 11
n in in in in in
What is referenced by ISO 8503? - ANSWERS-Grit and Shot profile comparators
in in in in in in in in in in in
List the reasons that mill scale is typically removed: - ANSWERS--
in in in in in in in in in in
to avoid future delamination
in in in in in
- to improve coating adhesion
in in in in in
- to eliminate a source of galvanic corrosion
in in in in in in in
Which standard defines a "commercially" blast cleaned surface? - ANSWERS-
in in in in in in in in in
NACE No. 3 / SSPC-SP 6 in in in in in
ISO SA 2-1/2 is a blast cleaning surface that is similar to which joint standard? -
in in in in in in in in in in in in in in in
ANSWERS-NACE No. 2 / SP 10
in in in in in in
