AMMO CDC COMPLETE QUESTIONS AND VERIFIED SOLUTIONS
✔✔which section within the munitions flight plans, schedules, controls, and directs all
munitions activities?
a) systems
b) material
c) production
d) supervision - ✔✔a) systems
✔✔which munitions element is not required at deployment locations or for units that do
not support aircraft?
a) munitions control
b) conventional maintenance
c) munitions plans and scheduling
d) combat plans/training/mobility - ✔✔d) combat plans/training/mobility
✔✔which munitions element maintains inspection/test results of lightning protection and
grounding systems?
a) munitions control
b) conventional maintenance
c) munitions plans and scheduling
d) combat plans/training/mobility - ✔✔c) munitions plans and scheduling
✔✔which munitions element maintains invalidates all auditable munitions records?
a) storage
b) control
c) inspection
d) operations - ✔✔d) operations
✔✔which munitions element determines and assigns condition codes to munitions
assets?
a) operations
b) inspection
c) control
d) storage - ✔✔b) inspection
✔✔which annex of an operations plan (OPLAN) identifies non-nuclear munitions
requirements?
a) a
b) b
c) c
d) d - ✔✔d) d
,✔✔The plan that is primarily developed for locations with a permanent Air Force
presence and translates MAJCOM operation planning concepts into base level
capabilities to support contingency forces is
a) expeditionary site
b) concept of operations
c) munitions employment
d) in-garrison expeditionary site - ✔✔d) in-garrison expeditionary site
✔✔which plan is primarily developed for locations without a permanent Air Force
presence and may contain only the minimum data necessary to make initial bad down
decisions?
a) operation
b) expeditionary site
c) munitions supervision
d) in-garrison expeditionary site - ✔✔b) expeditionary site
✔✔who at the base level develops munitions employment plan?
a) base commander
b) squadron commander
c) munitions supervision
d) installation deployment officer - ✔✔c) munitions supervision
✔✔when developing a munitions employment plan, the action that is the most efficient
way together information is to
a) conduct a site survey
b) review air force doctrine
c) review the base support plan
d) request supporting command complete an inventory of all available resources - ✔✔a)
conduct site survey
✔✔The war consumable distribution objective contains information on munitions
anticipated to be expended during
a) reorganization
b) peacetime
c) training
d) conflict - ✔✔d) conflict
✔✔in reference to implementing an operation or plan, which order gives the combatant
commander all essential execution planning information when the situation requires
process acceleration?
a) execution
b) planning
c) warning
d) alert - ✔✔b) planning
,✔✔in reference to implementing an operation or plan, the order that provides the
combatant commander an approved course of action, combat forces, and strategic lift
for planning purposes in lieu of other orders is
a) execution
b) planning
c) warning
d) alert - ✔✔d) alert
✔✔in reference to implementing an operation or plan, which order is issued by the
secretary of defense and directs the deployment and/or employment of forces?
a) warning
b) planning
c) execute
d) alert - ✔✔c) execute
✔✔Who requires and maintains the pallet couplers, plastic coverings, tiedown straps,
and dunnage for building deployment packages?
a) traffic management office
b) installation commander
c) fleet management
d) Deploying units - ✔✔d) deployment units
✔✔The frequency of training required for pallet build up personnel is
a) quarterly
b) semi annually
c) initial and annually
d) one time session only - ✔✔c) initial and annually
✔✔within which wing(s) is a commanders inspection program (CIP) required for
conducting internal inspections?
a) air base
b) operational
c) all air force
d) specialized mission - ✔✔c) all air force
✔✔A reason for an external inspection by an outside agency is
a) to comply with executive order 10995
b) for meeting with periodic scheduling timelines
c) when the wings IG is backlogged with overdue directions
d) to validate and verify the wings internal inspection process - ✔✔d) to validate and
verify the wings internal inspection process
✔✔management internal control toolset (MICT) program is a
a) unit resiliency tool
, b) hardcopy self-inspection checklist
c) continual real-time evaluation tool
d) system designed solely go up channel fraud waste and abuse complaints - ✔✔c)
continual real-time evaluation tool
✔✔the physical security protection level nuclear weapons falls under is
a) 1
b) 2
c) 3
d) 4 - ✔✔a) 1
✔✔under which physical security protection level do facilities storing conventional
munitions and air force accounting and finance vault areas fall under?
a) 1
b) 2
c) 3
d) 4 - ✔✔d) 4
✔✔what are the two security areas a munitions systems specialists will normally
encounter?
a) national defense areas and close-in security areas
b) unrestricted areas and close-in security areas
c) restricted areas and controlled areas
d) restricted areas and exclusion areas - ✔✔c) restricted areas and controlled areas
✔✔the person that provides written permission for authorizing personnel entry into a
restricted area is the
a) supervisor
b) flight chief
c) commander
d) chief of security forces - ✔✔c) commander
✔✔how many entry control points should be set up for each restricted area?
a) one
b) two
c) three
d) four - ✔✔a) one
✔✔which system is normally used to gain entry to a munitions storage area?
a) retinal authentication
b) sign in, sign out
c) face recognition
d) badge - ✔✔d) badge
✔✔which section within the munitions flight plans, schedules, controls, and directs all
munitions activities?
a) systems
b) material
c) production
d) supervision - ✔✔a) systems
✔✔which munitions element is not required at deployment locations or for units that do
not support aircraft?
a) munitions control
b) conventional maintenance
c) munitions plans and scheduling
d) combat plans/training/mobility - ✔✔d) combat plans/training/mobility
✔✔which munitions element maintains inspection/test results of lightning protection and
grounding systems?
a) munitions control
b) conventional maintenance
c) munitions plans and scheduling
d) combat plans/training/mobility - ✔✔c) munitions plans and scheduling
✔✔which munitions element maintains invalidates all auditable munitions records?
a) storage
b) control
c) inspection
d) operations - ✔✔d) operations
✔✔which munitions element determines and assigns condition codes to munitions
assets?
a) operations
b) inspection
c) control
d) storage - ✔✔b) inspection
✔✔which annex of an operations plan (OPLAN) identifies non-nuclear munitions
requirements?
a) a
b) b
c) c
d) d - ✔✔d) d
,✔✔The plan that is primarily developed for locations with a permanent Air Force
presence and translates MAJCOM operation planning concepts into base level
capabilities to support contingency forces is
a) expeditionary site
b) concept of operations
c) munitions employment
d) in-garrison expeditionary site - ✔✔d) in-garrison expeditionary site
✔✔which plan is primarily developed for locations without a permanent Air Force
presence and may contain only the minimum data necessary to make initial bad down
decisions?
a) operation
b) expeditionary site
c) munitions supervision
d) in-garrison expeditionary site - ✔✔b) expeditionary site
✔✔who at the base level develops munitions employment plan?
a) base commander
b) squadron commander
c) munitions supervision
d) installation deployment officer - ✔✔c) munitions supervision
✔✔when developing a munitions employment plan, the action that is the most efficient
way together information is to
a) conduct a site survey
b) review air force doctrine
c) review the base support plan
d) request supporting command complete an inventory of all available resources - ✔✔a)
conduct site survey
✔✔The war consumable distribution objective contains information on munitions
anticipated to be expended during
a) reorganization
b) peacetime
c) training
d) conflict - ✔✔d) conflict
✔✔in reference to implementing an operation or plan, which order gives the combatant
commander all essential execution planning information when the situation requires
process acceleration?
a) execution
b) planning
c) warning
d) alert - ✔✔b) planning
,✔✔in reference to implementing an operation or plan, the order that provides the
combatant commander an approved course of action, combat forces, and strategic lift
for planning purposes in lieu of other orders is
a) execution
b) planning
c) warning
d) alert - ✔✔d) alert
✔✔in reference to implementing an operation or plan, which order is issued by the
secretary of defense and directs the deployment and/or employment of forces?
a) warning
b) planning
c) execute
d) alert - ✔✔c) execute
✔✔Who requires and maintains the pallet couplers, plastic coverings, tiedown straps,
and dunnage for building deployment packages?
a) traffic management office
b) installation commander
c) fleet management
d) Deploying units - ✔✔d) deployment units
✔✔The frequency of training required for pallet build up personnel is
a) quarterly
b) semi annually
c) initial and annually
d) one time session only - ✔✔c) initial and annually
✔✔within which wing(s) is a commanders inspection program (CIP) required for
conducting internal inspections?
a) air base
b) operational
c) all air force
d) specialized mission - ✔✔c) all air force
✔✔A reason for an external inspection by an outside agency is
a) to comply with executive order 10995
b) for meeting with periodic scheduling timelines
c) when the wings IG is backlogged with overdue directions
d) to validate and verify the wings internal inspection process - ✔✔d) to validate and
verify the wings internal inspection process
✔✔management internal control toolset (MICT) program is a
a) unit resiliency tool
, b) hardcopy self-inspection checklist
c) continual real-time evaluation tool
d) system designed solely go up channel fraud waste and abuse complaints - ✔✔c)
continual real-time evaluation tool
✔✔the physical security protection level nuclear weapons falls under is
a) 1
b) 2
c) 3
d) 4 - ✔✔a) 1
✔✔under which physical security protection level do facilities storing conventional
munitions and air force accounting and finance vault areas fall under?
a) 1
b) 2
c) 3
d) 4 - ✔✔d) 4
✔✔what are the two security areas a munitions systems specialists will normally
encounter?
a) national defense areas and close-in security areas
b) unrestricted areas and close-in security areas
c) restricted areas and controlled areas
d) restricted areas and exclusion areas - ✔✔c) restricted areas and controlled areas
✔✔the person that provides written permission for authorizing personnel entry into a
restricted area is the
a) supervisor
b) flight chief
c) commander
d) chief of security forces - ✔✔c) commander
✔✔how many entry control points should be set up for each restricted area?
a) one
b) two
c) three
d) four - ✔✔a) one
✔✔which system is normally used to gain entry to a munitions storage area?
a) retinal authentication
b) sign in, sign out
c) face recognition
d) badge - ✔✔d) badge
