NSC LIFT TRUCK OPERATOR EXAM B.Final Exam 2026\2027.
a.10 feet
1. Whats is the minimum safe approach distance (MSAD) with power line.
b. Maintain 3 point of contact facing the lift truck
2. When mounting and dismounting from a lift truck.
a. Use a spotter
3. What you should do if you are driving through an area and your view is blocked.
B. No
4. You need to pick up a pallet and stack it on another pallet. The pallet weighs 3.800 pounds. Your lift
truck has a capacity of 3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck.
5. You should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service.
6. What should you do if you discover a defect during a pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above
7. Refresher training is required when..?
B. As low to the ground as possible given worksite conditions.
8. What's the correct amount of distance you should have between the load and the floor/ground while
driving.
C. Stay in the lift truck and lean away from the point of impact.
9. What's the best thing to do if your lift truck starts to flip over...?
10. How does the boom extension affect your lifting capacity?
D. Decrease your lifting capacity.
C.In direction of the real axle.
11. When you drive on an incline and the load is uphill, how does the center of gravity shift?
C. The operator is more than 25 feet away from the lift truck.
12. A lift truck is considered unattended when.
A. May change
13. When you lift truck has an attachment, the capacity to lift the weight of a load
b. In the direction of the front axle.
a.10 feet
1. Whats is the minimum safe approach distance (MSAD) with power line.
b. Maintain 3 point of contact facing the lift truck
2. When mounting and dismounting from a lift truck.
a. Use a spotter
3. What you should do if you are driving through an area and your view is blocked.
B. No
4. You need to pick up a pallet and stack it on another pallet. The pallet weighs 3.800 pounds. Your lift
truck has a capacity of 3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck.
5. You should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service.
6. What should you do if you discover a defect during a pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above
7. Refresher training is required when..?
B. As low to the ground as possible given worksite conditions.
8. What's the correct amount of distance you should have between the load and the floor/ground while
driving.
C. Stay in the lift truck and lean away from the point of impact.
9. What's the best thing to do if your lift truck starts to flip over...?
10. How does the boom extension affect your lifting capacity?
D. Decrease your lifting capacity.
C.In direction of the real axle.
11. When you drive on an incline and the load is uphill, how does the center of gravity shift?
C. The operator is more than 25 feet away from the lift truck.
12. A lift truck is considered unattended when.
A. May change
13. When you lift truck has an attachment, the capacity to lift the weight of a load
b. In the direction of the front axle.
