1
INTRODUCTION TO SANS TEST STUDY GUIDE
EXAM WITH QUESTIONS AND CORRECT
ANSWERS
Which optional, licensed HPE B-Series SAN switch capability enables each switch to monitor a variety of
SAN fabric elements for potential faults and automatically alerts the network administrator of problems
before they become failures?
SAN Network Advisor
Advanced Performance Monitor
Fabric Watch
Fabric Vision
Which 12- or 24-port Fibre Channel switch from HPE is designed and recommended for use in hyper-
scale, private cloud storage, and highly virtualized environments, and supports the “pay-as-you-grow”
model?
HPE StoreFabric SN6000B switch
HPE StoreFabric 8/24 switch
HPE StoreFabric SN6500B switch
HPE StoreFabric SN3000B switch
Which HPE C-Series enterprise package license feature enables selective transfer of data traffic between
specific initiators and targets on different virtual SANs without merging them into a single logical fabric?
Extended VSAN Fabric (EVF)
Inter-VSAN Routing (IVR)
Adaptive Networking (AN)
Enhanced Group Management (EGM)
, 2
Which statements correctly describe the HPE SN6000 Fibre Channel Switch? (Select two.)
Its single-power models are upgradable to dual power.
It starts as a 24-port switch and is expandable to 48 ports within a single switch device.
It requires the Enterprise Fabric Management Suite (EFMS) software.
It comes in a 1U form factor.
It has four (4) dedicated stacking links.
Which HPE-supported switches are designed to fit into the interconnect bays of the HPE BladeSystem c-
Class enclosure? (Select two.)
HPE Encryption SAN Switch
Brocade 16Gb SAN Switch
HPE 8/20q Fibre Channel Switch
Cisco MDS 9222i Multiservice Modular Fabric Switch
HPE 6Gb SAS Switch
You need to reset your HPE B-Series SAN switch to the HPE default seFngs. What must you do?
Use the configDownload command with a downloaded HPE default configuration file.
Download the latest firmware file from HPE and use the firmwareDownload command.
Use the configDefault command to reset the SAN switch configuration.
Call the HPE support center and obtain a specific set of instructions from the support personnel.
What is the out-of-the-factory default username and password for the HPE B-Series SAN switches?
username = hpe, password = hpe
username = admin, password = password
username = admin, password = <blank>
username = <blank>, password = administrator
INTRODUCTION TO SANS TEST STUDY GUIDE
EXAM WITH QUESTIONS AND CORRECT
ANSWERS
Which optional, licensed HPE B-Series SAN switch capability enables each switch to monitor a variety of
SAN fabric elements for potential faults and automatically alerts the network administrator of problems
before they become failures?
SAN Network Advisor
Advanced Performance Monitor
Fabric Watch
Fabric Vision
Which 12- or 24-port Fibre Channel switch from HPE is designed and recommended for use in hyper-
scale, private cloud storage, and highly virtualized environments, and supports the “pay-as-you-grow”
model?
HPE StoreFabric SN6000B switch
HPE StoreFabric 8/24 switch
HPE StoreFabric SN6500B switch
HPE StoreFabric SN3000B switch
Which HPE C-Series enterprise package license feature enables selective transfer of data traffic between
specific initiators and targets on different virtual SANs without merging them into a single logical fabric?
Extended VSAN Fabric (EVF)
Inter-VSAN Routing (IVR)
Adaptive Networking (AN)
Enhanced Group Management (EGM)
, 2
Which statements correctly describe the HPE SN6000 Fibre Channel Switch? (Select two.)
Its single-power models are upgradable to dual power.
It starts as a 24-port switch and is expandable to 48 ports within a single switch device.
It requires the Enterprise Fabric Management Suite (EFMS) software.
It comes in a 1U form factor.
It has four (4) dedicated stacking links.
Which HPE-supported switches are designed to fit into the interconnect bays of the HPE BladeSystem c-
Class enclosure? (Select two.)
HPE Encryption SAN Switch
Brocade 16Gb SAN Switch
HPE 8/20q Fibre Channel Switch
Cisco MDS 9222i Multiservice Modular Fabric Switch
HPE 6Gb SAS Switch
You need to reset your HPE B-Series SAN switch to the HPE default seFngs. What must you do?
Use the configDownload command with a downloaded HPE default configuration file.
Download the latest firmware file from HPE and use the firmwareDownload command.
Use the configDefault command to reset the SAN switch configuration.
Call the HPE support center and obtain a specific set of instructions from the support personnel.
What is the out-of-the-factory default username and password for the HPE B-Series SAN switches?
username = hpe, password = hpe
username = admin, password = password
username = admin, password = <blank>
username = <blank>, password = administrator
