AMT MLT Exam Study Guide Practice
Test #2 rated A
Chain of custody. - correct answer ✅Beginning with the moment the specimen is
collected and transported to the laboratory, to the analysis itself and the reporting
of the results, must be documented by a process known as
Quality control - correct answer ✅A process that monitors the accuracy and
reproducibility of results through the use of control specimens.
Accuracy - correct answer ✅Describes how close a test result is to the true value.
Calibration - correct answer ✅The comparison of an instrument measurement or
reading to a known physical constant.
Category C - correct answer ✅What category of bioterrorism agents has the
following characteristics?
These agents have the third-highest priority and include emerging pathogens that
could be engineered for mass dissemination in the future because of availability,
ease of production and dissemination?
Category A. - correct answer ✅Agents anthrax, botulism, plague, smallpox,
tularemia, filoviruses, and arenaviruses are classified as
Occupational Exposure to Bloodborne Pathogens - correct answer ✅What
regulation that became law in 1992, requires that laboratories develop,
implement, and comply with a plan that ensures the protective safety of
laboratory staff to potential infectious blood-borne pathogens and manage and
handle medical waste in a safe and effective manner?
,AMT MLT Exam Study Guide Practice
Test #2 rated A
Electric equipment. - correct answer ✅Class C fire extinguishers are used for
Category B. - correct answer ✅Agents brucellosis, epsilon toxin, food
contaminants, glanders, melioidosis, psittacosis, Q fever, and ricin toxin are
classified as
Safety Data Sheets - correct answer ✅Material Safety Data Sheets (MSDSs) are
now called:
Pictograms - correct answer ✅The GHS brings with it a new chemical labeling
standard using ____________.
2015 - correct answer ✅All chemical manufacturers and distributors must comply
with all of the new provisions in the revised standards by June 1 ______________.
16 - correct answer ✅The new Safety Data Sheets (SDSs) will require ______
specific sections, ensuring consistency in the presentation of the information.
Material safety data sheet (MSDS). - correct answer ✅Reference materials about
the individual chemical are provided by all chemical manufacturers and suppliers
by means of
Type I - correct answer ✅For qualitative chemistry procedures and for most
procedures done in hematology, immunology, microbiology, and other clinical test
areas, this type of water is suitable. This type of water is used for general lab tests
that do not require Type I water.
, AMT MLT Exam Study Guide Practice
Test #2 rated A
Celsius plus 273 - correct answer ✅How do you convert Celsius to Kelvin?
RBC - correct answer ✅In the calculation of MCV = HCT x 10/___?
40X objective - correct answer ✅The objective that should never have oil used on
it is the
Flourescent. - correct answer ✅The microscope commonly used in cellular
biology that has the ability to distinguish between living and dead cells and
monitor activity within living cells is the
Kohler illumination. - correct answer ✅The most common method of illuminating
specimens on a microscope is
a hematoma. - correct answer ✅Failure to apply sufficient pressure to the
venipuncture site could result in
Blood gases, slides/smear, EDTA tubes, other additive minicontainers, and serum
containers - correct answer ✅Order of draw for capillary specimens:
contact, airborne, and droplet. - correct answer ✅Transmission-based
precautions are divided into three basic categories:
Lipemic specimens - correct answer ✅What is milky-white in color and may
interfere with chemical determinations such as triglyceride assay?
Test #2 rated A
Chain of custody. - correct answer ✅Beginning with the moment the specimen is
collected and transported to the laboratory, to the analysis itself and the reporting
of the results, must be documented by a process known as
Quality control - correct answer ✅A process that monitors the accuracy and
reproducibility of results through the use of control specimens.
Accuracy - correct answer ✅Describes how close a test result is to the true value.
Calibration - correct answer ✅The comparison of an instrument measurement or
reading to a known physical constant.
Category C - correct answer ✅What category of bioterrorism agents has the
following characteristics?
These agents have the third-highest priority and include emerging pathogens that
could be engineered for mass dissemination in the future because of availability,
ease of production and dissemination?
Category A. - correct answer ✅Agents anthrax, botulism, plague, smallpox,
tularemia, filoviruses, and arenaviruses are classified as
Occupational Exposure to Bloodborne Pathogens - correct answer ✅What
regulation that became law in 1992, requires that laboratories develop,
implement, and comply with a plan that ensures the protective safety of
laboratory staff to potential infectious blood-borne pathogens and manage and
handle medical waste in a safe and effective manner?
,AMT MLT Exam Study Guide Practice
Test #2 rated A
Electric equipment. - correct answer ✅Class C fire extinguishers are used for
Category B. - correct answer ✅Agents brucellosis, epsilon toxin, food
contaminants, glanders, melioidosis, psittacosis, Q fever, and ricin toxin are
classified as
Safety Data Sheets - correct answer ✅Material Safety Data Sheets (MSDSs) are
now called:
Pictograms - correct answer ✅The GHS brings with it a new chemical labeling
standard using ____________.
2015 - correct answer ✅All chemical manufacturers and distributors must comply
with all of the new provisions in the revised standards by June 1 ______________.
16 - correct answer ✅The new Safety Data Sheets (SDSs) will require ______
specific sections, ensuring consistency in the presentation of the information.
Material safety data sheet (MSDS). - correct answer ✅Reference materials about
the individual chemical are provided by all chemical manufacturers and suppliers
by means of
Type I - correct answer ✅For qualitative chemistry procedures and for most
procedures done in hematology, immunology, microbiology, and other clinical test
areas, this type of water is suitable. This type of water is used for general lab tests
that do not require Type I water.
, AMT MLT Exam Study Guide Practice
Test #2 rated A
Celsius plus 273 - correct answer ✅How do you convert Celsius to Kelvin?
RBC - correct answer ✅In the calculation of MCV = HCT x 10/___?
40X objective - correct answer ✅The objective that should never have oil used on
it is the
Flourescent. - correct answer ✅The microscope commonly used in cellular
biology that has the ability to distinguish between living and dead cells and
monitor activity within living cells is the
Kohler illumination. - correct answer ✅The most common method of illuminating
specimens on a microscope is
a hematoma. - correct answer ✅Failure to apply sufficient pressure to the
venipuncture site could result in
Blood gases, slides/smear, EDTA tubes, other additive minicontainers, and serum
containers - correct answer ✅Order of draw for capillary specimens:
contact, airborne, and droplet. - correct answer ✅Transmission-based
precautions are divided into three basic categories:
Lipemic specimens - correct answer ✅What is milky-white in color and may
interfere with chemical determinations such as triglyceride assay?
