RELIAS DYSRHYTHMIA BASIC B FINAL PAPER
2026 QUESTIONS AND ANSWERS GRADED
A+
◉eye bolt lifting plug, ogive, bourlette, body, groumet, base, rotating
band, obturator band, base cover. Answer: 9 parts of a complete
round
◉TM 9-1025-215-10. Answer: the TM that covers the M777A1/A2
howitzer
◉4500 - 11900. Answer: when using the m231 macs charge using
the zone 1 and 2, what is the maximum range
◉4 rounds per minute for 2 minutes. Answer: what is the maximum
rate of fire of m777a2
◉screen block interrupted thread. Answer: the m777a2 is equipped
with what type of breechblock
◉magazine fed that loads, fires, and extracts. Answer: what type of
firing mechanism does the m777a2 have
, ◉75 and 150 meters. Answer: for the m777-series howitzer, the
aiming post are emplaced approximately
◉target heading. Answer: during a move to the designated area, the
DFCS will allow the section chief to enter a _____ without interfering
with the original move order
◉At the end of the truck behind the driver. Answer: During the move
to the next location, where does the gunner sit
◉75/150 mils. Answer: when using the best method, the reading on
the near and far post should be
◉10 mils. Answer: one turn of the elevating hand wheel moves the
tube
◉4 : bore clear, 5 points of contact, oil index pin slightly flushed or
indented, proper breech and firing mech function (white witness
marks aligned). Answer: how many pre-fire checks are there and
what are they
◉17mm. Answer: what wrench do you use to adjust the equilibrator
screw
2026 QUESTIONS AND ANSWERS GRADED
A+
◉eye bolt lifting plug, ogive, bourlette, body, groumet, base, rotating
band, obturator band, base cover. Answer: 9 parts of a complete
round
◉TM 9-1025-215-10. Answer: the TM that covers the M777A1/A2
howitzer
◉4500 - 11900. Answer: when using the m231 macs charge using
the zone 1 and 2, what is the maximum range
◉4 rounds per minute for 2 minutes. Answer: what is the maximum
rate of fire of m777a2
◉screen block interrupted thread. Answer: the m777a2 is equipped
with what type of breechblock
◉magazine fed that loads, fires, and extracts. Answer: what type of
firing mechanism does the m777a2 have
, ◉75 and 150 meters. Answer: for the m777-series howitzer, the
aiming post are emplaced approximately
◉target heading. Answer: during a move to the designated area, the
DFCS will allow the section chief to enter a _____ without interfering
with the original move order
◉At the end of the truck behind the driver. Answer: During the move
to the next location, where does the gunner sit
◉75/150 mils. Answer: when using the best method, the reading on
the near and far post should be
◉10 mils. Answer: one turn of the elevating hand wheel moves the
tube
◉4 : bore clear, 5 points of contact, oil index pin slightly flushed or
indented, proper breech and firing mech function (white witness
marks aligned). Answer: how many pre-fire checks are there and
what are they
◉17mm. Answer: what wrench do you use to adjust the equilibrator
screw
