NCCCO RIGGER 1 ACTUAL TEST PAPER
COMPLETE QUESTIONS AND SOLUTIONS
TESTED ANSWERS
◉ According to OSHA, natural and synthetic fiber rope slings shall be
removed from service when...
a. powdered fiber between strands are present
b. ID tag is attached to the sling
c. used in temperature exceeding 125°F
d. all of the above
Answer: A) powdered fiber between strands are present
◉ When correctly installing U-Bolt type wire rope clips, the U-Bolt
portion of the clip must be installed on which end of the wire rope?
a. The dead or short end.
b. The live or long end.
c. Installed on either end.
d. Alternating each clip.
Answer: A) The dead or short end
◉ According to ASME B30.6, compression hardware shall be
removed from service if which of the following are visible?
,a. missing or illegible identification.
b. excessive pitting or corrosion.
c. nicks or gouges.
d. All of the above.
Answer: D) all of the above
◉ According to ASME B30.9, what is the minimum grade alloy steel
chain shall be used for hoisting chain?
a. 80
b. 60
c. 40
d. 20
Answer: A) 80
◉ According to ASME, which of the following statements is correct?
a. As horizontal load angle increases, stress increases.
b. As horizontal load angle decreases, stress decreases.
c. As horizontal load angle decreases, stress increases.
d. All of the above.
Answer: C) horizontal load angle decreases,stress decreases.
, ◉ According to ASME B30.9, to achieve load stability when lifting
the attachment points should?
A) Below center of gravity
B) Above center of gravity
C) Anywher on the load
D) cannot be achieved
Answer: B) above center of gravity
◉ According to B30.9, a visual inspection of rigging hardware used
in material handling shall be performed?
A) Each month
B) Each week
C)Each day prior
D)Each shift prior to use
Answer: D) Each shift prior to use
◉ Referring to the rigger reference booklet, what would be the rated
capacity of a size 4 polyester round sling using a choker hitch?
a. 6,700 lbs
b. 8,500 lbs
c. 10,600 lbs
d. 13,200 lbs
COMPLETE QUESTIONS AND SOLUTIONS
TESTED ANSWERS
◉ According to OSHA, natural and synthetic fiber rope slings shall be
removed from service when...
a. powdered fiber between strands are present
b. ID tag is attached to the sling
c. used in temperature exceeding 125°F
d. all of the above
Answer: A) powdered fiber between strands are present
◉ When correctly installing U-Bolt type wire rope clips, the U-Bolt
portion of the clip must be installed on which end of the wire rope?
a. The dead or short end.
b. The live or long end.
c. Installed on either end.
d. Alternating each clip.
Answer: A) The dead or short end
◉ According to ASME B30.6, compression hardware shall be
removed from service if which of the following are visible?
,a. missing or illegible identification.
b. excessive pitting or corrosion.
c. nicks or gouges.
d. All of the above.
Answer: D) all of the above
◉ According to ASME B30.9, what is the minimum grade alloy steel
chain shall be used for hoisting chain?
a. 80
b. 60
c. 40
d. 20
Answer: A) 80
◉ According to ASME, which of the following statements is correct?
a. As horizontal load angle increases, stress increases.
b. As horizontal load angle decreases, stress decreases.
c. As horizontal load angle decreases, stress increases.
d. All of the above.
Answer: C) horizontal load angle decreases,stress decreases.
, ◉ According to ASME B30.9, to achieve load stability when lifting
the attachment points should?
A) Below center of gravity
B) Above center of gravity
C) Anywher on the load
D) cannot be achieved
Answer: B) above center of gravity
◉ According to B30.9, a visual inspection of rigging hardware used
in material handling shall be performed?
A) Each month
B) Each week
C)Each day prior
D)Each shift prior to use
Answer: D) Each shift prior to use
◉ Referring to the rigger reference booklet, what would be the rated
capacity of a size 4 polyester round sling using a choker hitch?
a. 6,700 lbs
b. 8,500 lbs
c. 10,600 lbs
d. 13,200 lbs
