Contractors License General B Trade Practice Exam Practice
Latest 2026 Updated Questions and Verified 100% Solutions
(2026/2027) Grade: A+|Status: Guaranteed Pass
Handrails are required on any scaffold that rises _____or more abvove the ground. - Answers -7-
1/2 '
What is the minimum distance required between scaffolding and high-tension power lines? -
Answers -6'
If a contractor discovers his/her workers using an unsafe scaffold, he/she must: - Answers -order
the employees off the scaffold until it is repaired
All Scaffolding shall be at least ____ in width. - Answers -20''
You are working on a 6' x 2-1/2' metal rolling scaffold that is 5' high. its rubber wheels rest on a
surface that is five degrees from level. When it becomes time to move to a different area, you
instruct a worker to move the scaffold while you are still on it. You have proceed: - Answers -
Incorrectly- the angle of the floor surface does not allow movement of the scaffold with workers
on the platform
A rolling scaffold may be moved with workers on the platform if the floor surface is within
______ of level. - Answers -3 degrees
1|Page
, Railing should be provided on all scaffolds on which workers will be elevated _____ or more
above the floor. - Answers -7-1/2'
The total load on the platform of a light-trades scaffold shall not average more than _____
pounds per square foot. - Answers -25
How many wheels should swivel on a 4-wheel scaffold? - Answers -At least 2
How many wheels on scaffold should be lockable? - Answers -All of them
Cal/OSHA requires a built up scaffold over 7.5ft high to have a _____ as a means of stopping
falls. - Answers -a guardrail (42''- 45'' high)
Cal/OSHA requires a suspended scaffold over 7.5ft high to have a guardrail (36''- 42'' high) and: -
Answers -a safety belt attached to a separate anchor point
The maximum allowed load on a swinging scaffold is: - Answers -100 lbs./sq/ft.
The guardrail on a suspended scaffold is ____ above the platform. - Answers -36''-42''
2|Page
Latest 2026 Updated Questions and Verified 100% Solutions
(2026/2027) Grade: A+|Status: Guaranteed Pass
Handrails are required on any scaffold that rises _____or more abvove the ground. - Answers -7-
1/2 '
What is the minimum distance required between scaffolding and high-tension power lines? -
Answers -6'
If a contractor discovers his/her workers using an unsafe scaffold, he/she must: - Answers -order
the employees off the scaffold until it is repaired
All Scaffolding shall be at least ____ in width. - Answers -20''
You are working on a 6' x 2-1/2' metal rolling scaffold that is 5' high. its rubber wheels rest on a
surface that is five degrees from level. When it becomes time to move to a different area, you
instruct a worker to move the scaffold while you are still on it. You have proceed: - Answers -
Incorrectly- the angle of the floor surface does not allow movement of the scaffold with workers
on the platform
A rolling scaffold may be moved with workers on the platform if the floor surface is within
______ of level. - Answers -3 degrees
1|Page
, Railing should be provided on all scaffolds on which workers will be elevated _____ or more
above the floor. - Answers -7-1/2'
The total load on the platform of a light-trades scaffold shall not average more than _____
pounds per square foot. - Answers -25
How many wheels should swivel on a 4-wheel scaffold? - Answers -At least 2
How many wheels on scaffold should be lockable? - Answers -All of them
Cal/OSHA requires a built up scaffold over 7.5ft high to have a _____ as a means of stopping
falls. - Answers -a guardrail (42''- 45'' high)
Cal/OSHA requires a suspended scaffold over 7.5ft high to have a guardrail (36''- 42'' high) and: -
Answers -a safety belt attached to a separate anchor point
The maximum allowed load on a swinging scaffold is: - Answers -100 lbs./sq/ft.
The guardrail on a suspended scaffold is ____ above the platform. - Answers -36''-42''
2|Page
