Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
1. How should the drain pipes be placed in a Holes facing down
drain tile system?
2. Why is it crucial not to alter fire-rated metal Can affect performance
doors and frames on-site?
3. What is the primary function of an excava- Digging and removing soil
tor in the process of site preparation?
4. Which type of gypsum board is suitable for Moisture resistant gypsum board
areas with high humidity?
5. What is the minimum penetration depth ¾ inch
of the fasteners used for clay roof tiles ac-
cording to the International Building Code
(IBC)?
6. What is the role of a 'Nailing Flange' in the Secure window to the framing
window installation process?
7. Where can reinforcing bars be placed in Vertical, horizontally, or both
masonry walls?
8. What is the minimum aggregate clear 20 feet
egress width required for theaters?
9. At what height should guardrails be in- 38 to 45 inches above scaffolding
stalled on scaffolds manufactured after
January 1, 2000, according to OSHA stan-
dards?
10. What is the minimum height for guards on 34 inches
stairs according to the International Build-
ing Code (IBC)?
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
11. What is the essential function of water in Activate cement through hydration
the production of concrete in relation to
cement?
12. Which of the following is NOT a type of joint Epoxy sealants
sealer?
13. What is the purpose of concrete forms in To shape and support concrete till it hard-
construction? ens
14. What should be the maximum spacing be- 4 inches
tween balusters for a stair railing in a com-
mercial building?
15. What is a distinguishing feature of an open Valley lining is exposed to elements
valley in roof construction?
16. What is the function of 'Joists' in Used in floor and ceiling construction
Cold-Formed Metal Framing?
17. Which two factors are paramount in ensur- Moisture content and thickness of fill layer
ing the fill is properly compacted during
site preparation?
18. What approach is best for maximizing en- High quality glazing and effective weather
ergy efficiency when selecting windows for stripping
a new residential project?
19. What is the role of Portland cement in con- Reacts with water to form a paste to hold
crete? aggregate together
20. 2200 degrees
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
At what temperature is the bisque typically
fired in a kiln during the manufacturing
process of ceramic tiles?
21. What is the area of steel required in square 1
inches for a tensile force of 60,000 lbs, yield
strength of 60,000 psi, and effective depth
of 12 inches?
22. How many board feet are in 10 pieces of 16 board feet
lumber measuring 2" × 6" × 16'?
23. Why are control joints integrated into wall Allow for movement caused by tempera-
designs in masonry construction? ture changes and prevent cracking
24. What is the purpose of weep holes in a Allow for drainage
cavity wall?
25. What is a disadvantage of using pneumatic Require an air compressor and can be
tools, such as a roofing nailer, in thermal cumbersome
and moisture protection work?
26. What is the correct process for installing Lay perpendicular and ⅛ space between
wood panel sheathing? panels
27. What is the general rule for stair design in Between 13 and 15 inches
terms of the sum of the riser height and
tread depth?
28. What is the hydrostatic pressure at the bot- 49.05
tom of a water containment system locat-
ed 5 meters below ground level?
29.
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
What are the correct proportions of Port- 1 part Portland cement, 1/2 part hydrated
land cement, hydrated lime, and sand by lime, and 4 1/2 to 6 parts sand
volume for a Type S mortar mix?
30. What protective measures are required for Shoring, trench box, or sloping
workers in excavations deeper than 5 feet
according to OSHA standards?
31. What is the proper order of operations Prep, adhesive, laying, nailing
when installing plywood subflooring?
32. Which perm value range correctly identi- Greater than .1 and less than or equal to 1
fies a material as a Class II Vapor Retarder?
33. Which type of metal fastener is designed Drywall screws
with a bugle head to attach drywall to wood
or metal studs?
34. What does the term 'overdig' refer to in the Excavating beyond planned depth and
context of earthwork? width
35. Which type of gypsum board would be Moisture-Resistant Gypsum Board
most suitable for use in a bathroom?
36. What can an employee legally do if they are Requesting an OSHA inspection
concerned about workplace safety accord-
ing to OSHA regulations?
37. Which material would be the safest choice Concrete
for the main support structures in a
high-rise residential building classified as
Type I construction?
38. What is a fire-rated door?
Study online at https://quizlet.com/_ipblft
1. How should the drain pipes be placed in a Holes facing down
drain tile system?
2. Why is it crucial not to alter fire-rated metal Can affect performance
doors and frames on-site?
3. What is the primary function of an excava- Digging and removing soil
tor in the process of site preparation?
4. Which type of gypsum board is suitable for Moisture resistant gypsum board
areas with high humidity?
5. What is the minimum penetration depth ¾ inch
of the fasteners used for clay roof tiles ac-
cording to the International Building Code
(IBC)?
6. What is the role of a 'Nailing Flange' in the Secure window to the framing
window installation process?
7. Where can reinforcing bars be placed in Vertical, horizontally, or both
masonry walls?
8. What is the minimum aggregate clear 20 feet
egress width required for theaters?
9. At what height should guardrails be in- 38 to 45 inches above scaffolding
stalled on scaffolds manufactured after
January 1, 2000, according to OSHA stan-
dards?
10. What is the minimum height for guards on 34 inches
stairs according to the International Build-
ing Code (IBC)?
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
11. What is the essential function of water in Activate cement through hydration
the production of concrete in relation to
cement?
12. Which of the following is NOT a type of joint Epoxy sealants
sealer?
13. What is the purpose of concrete forms in To shape and support concrete till it hard-
construction? ens
14. What should be the maximum spacing be- 4 inches
tween balusters for a stair railing in a com-
mercial building?
15. What is a distinguishing feature of an open Valley lining is exposed to elements
valley in roof construction?
16. What is the function of 'Joists' in Used in floor and ceiling construction
Cold-Formed Metal Framing?
17. Which two factors are paramount in ensur- Moisture content and thickness of fill layer
ing the fill is properly compacted during
site preparation?
18. What approach is best for maximizing en- High quality glazing and effective weather
ergy efficiency when selecting windows for stripping
a new residential project?
19. What is the role of Portland cement in con- Reacts with water to form a paste to hold
crete? aggregate together
20. 2200 degrees
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
At what temperature is the bisque typically
fired in a kiln during the manufacturing
process of ceramic tiles?
21. What is the area of steel required in square 1
inches for a tensile force of 60,000 lbs, yield
strength of 60,000 psi, and effective depth
of 12 inches?
22. How many board feet are in 10 pieces of 16 board feet
lumber measuring 2" × 6" × 16'?
23. Why are control joints integrated into wall Allow for movement caused by tempera-
designs in masonry construction? ture changes and prevent cracking
24. What is the purpose of weep holes in a Allow for drainage
cavity wall?
25. What is a disadvantage of using pneumatic Require an air compressor and can be
tools, such as a roofing nailer, in thermal cumbersome
and moisture protection work?
26. What is the correct process for installing Lay perpendicular and ⅛ space between
wood panel sheathing? panels
27. What is the general rule for stair design in Between 13 and 15 inches
terms of the sum of the riser height and
tread depth?
28. What is the hydrostatic pressure at the bot- 49.05
tom of a water containment system locat-
ed 5 meters below ground level?
29.
, Michigan Residential Builders Exam Questions PSI
Study online at https://quizlet.com/_ipblft
What are the correct proportions of Port- 1 part Portland cement, 1/2 part hydrated
land cement, hydrated lime, and sand by lime, and 4 1/2 to 6 parts sand
volume for a Type S mortar mix?
30. What protective measures are required for Shoring, trench box, or sloping
workers in excavations deeper than 5 feet
according to OSHA standards?
31. What is the proper order of operations Prep, adhesive, laying, nailing
when installing plywood subflooring?
32. Which perm value range correctly identi- Greater than .1 and less than or equal to 1
fies a material as a Class II Vapor Retarder?
33. Which type of metal fastener is designed Drywall screws
with a bugle head to attach drywall to wood
or metal studs?
34. What does the term 'overdig' refer to in the Excavating beyond planned depth and
context of earthwork? width
35. Which type of gypsum board would be Moisture-Resistant Gypsum Board
most suitable for use in a bathroom?
36. What can an employee legally do if they are Requesting an OSHA inspection
concerned about workplace safety accord-
ing to OSHA regulations?
37. Which material would be the safest choice Concrete
for the main support structures in a
high-rise residential building classified as
Type I construction?
38. What is a fire-rated door?
