PROSTHETIC CPM EXAMPREP PRACTICE
QUESTIONS AND CORRECT ANSWERS FULL
SOLUTION
⩥ What questions should you ask at evaluation for a prosthetics.
Answer: Cause and date of amputation
Comorbidities (DM, kidney, hypertension0
Contralateral Limb integrity
Skin Integrity
Hand Dexterity/strength
Vocational/Recreational Activities
Goals
Assistive Devices Used
MMT/ROM (Thomas test)
⩥ What are the advantages to a PTB style socket?.
Answer: Rotational Control, Relief over bony prominences
⩥ What are the advantages to a TSB style socket.
Answer: Equal distribution of pressure over entire limb, use of liner to
reduce shear forces and skin irritation, decreased pistoning
,⩥ What are the disadvantages to a PTB style socket?.
Answer: Concentrated pressures on select few areas, high pressure on
patellar tendon
⩥ What are the disadvantages to a TSB style socket.
Answer: Requires the use of liners patient must be able to don liner, lack
of rotational control
⩥ What are the advantages to locking liner suspension.
Answer: Auditory confirmation of lock increase confidence, can have
patient start to don and engage lock while seated, easy to manage
volume with socks
⩥ What are the disadvantages to a locking liner suspension.
Answer: Pistoning/milking of the limb, can be difficult for patient to
align pin and lock must be consistent, lack of a rotational control
⩥ What are the advantages to a cushion liner/sleeve suspension.
Answer: Reduced pistoning of prosthesis, easy volume management,
secure suspension, benefits of liner
⩥ What are the disadvantages to a cushion liner/sleeve susupension.
Answer: Increased bulk around the knee that can reduce knee flexion,
can be hot (extra layer), requires dexterity to use liner
, ⩥ What are the advantages to a seal in system for suspension.
Answer: Decreased pistoning, increased proprioception, decreased
apparent weight of prosthesis
⩥ What are the disadvantages to a a seal in system for suspension?.
Answer: More difficult to control volume with socks, must have good
balance to don prosthesis, requires exact fit
⩥ What are the advantages to an elevated vacuum system.
Answer: Promotes limb health, decreases pistoning, increased
proprioception, decreased sweating, decreased apparent weight
⩥ What are the disadvantages to elevated vacuum.
Answer: Can cause damage to limb if fit is not appropriate, requires
exact fit, bulky and increased weight, expensive
⩥ What are the advantages of supracondylar suspension.
Answer: Good for short limbs, ligament laxity, knee instability
Improves stability at knee, ease of don and doffing, increased M/L
stability
QUESTIONS AND CORRECT ANSWERS FULL
SOLUTION
⩥ What questions should you ask at evaluation for a prosthetics.
Answer: Cause and date of amputation
Comorbidities (DM, kidney, hypertension0
Contralateral Limb integrity
Skin Integrity
Hand Dexterity/strength
Vocational/Recreational Activities
Goals
Assistive Devices Used
MMT/ROM (Thomas test)
⩥ What are the advantages to a PTB style socket?.
Answer: Rotational Control, Relief over bony prominences
⩥ What are the advantages to a TSB style socket.
Answer: Equal distribution of pressure over entire limb, use of liner to
reduce shear forces and skin irritation, decreased pistoning
,⩥ What are the disadvantages to a PTB style socket?.
Answer: Concentrated pressures on select few areas, high pressure on
patellar tendon
⩥ What are the disadvantages to a TSB style socket.
Answer: Requires the use of liners patient must be able to don liner, lack
of rotational control
⩥ What are the advantages to locking liner suspension.
Answer: Auditory confirmation of lock increase confidence, can have
patient start to don and engage lock while seated, easy to manage
volume with socks
⩥ What are the disadvantages to a locking liner suspension.
Answer: Pistoning/milking of the limb, can be difficult for patient to
align pin and lock must be consistent, lack of a rotational control
⩥ What are the advantages to a cushion liner/sleeve suspension.
Answer: Reduced pistoning of prosthesis, easy volume management,
secure suspension, benefits of liner
⩥ What are the disadvantages to a cushion liner/sleeve susupension.
Answer: Increased bulk around the knee that can reduce knee flexion,
can be hot (extra layer), requires dexterity to use liner
, ⩥ What are the advantages to a seal in system for suspension.
Answer: Decreased pistoning, increased proprioception, decreased
apparent weight of prosthesis
⩥ What are the disadvantages to a a seal in system for suspension?.
Answer: More difficult to control volume with socks, must have good
balance to don prosthesis, requires exact fit
⩥ What are the advantages to an elevated vacuum system.
Answer: Promotes limb health, decreases pistoning, increased
proprioception, decreased sweating, decreased apparent weight
⩥ What are the disadvantages to elevated vacuum.
Answer: Can cause damage to limb if fit is not appropriate, requires
exact fit, bulky and increased weight, expensive
⩥ What are the advantages of supracondylar suspension.
Answer: Good for short limbs, ligament laxity, knee instability
Improves stability at knee, ease of don and doffing, increased M/L
stability
