Florida Firefighter 2026 Practical Skills
Examination Questions with Answers
and Rationales
1. PPE Inspection
Before entering a structure fire, a firefighter discovers a small
tear in the outer shell of the turnout coat. What is the best
action?
A. Cover the tear with duct tape
B. Wear the coat only for exterior operations
C. Remove the damaged coat from service and report it
D. Continue using it if the thermal liner is intact
Rationale: Damaged protective clothing may compromise
firefighter protection and should be removed from service
according to department procedures.
2. SCBA Donning
When donning an SCBA under emergency conditions, the
firefighter's first priority is to:
A. Open the cylinder valve
B. Adjust the shoulder straps
C. Ensure the facepiece is properly positioned and obtain an
effective seal
D. Activate the PASS device
,Rationale: A proper facepiece seal is essential for respiratory
protection in an immediately dangerous atmosphere.
3. SCBA Air Management
A firefighter operating inside a structure should begin
withdrawing before the SCBA cylinder reaches empty. The
primary reason is to:
A. Prevent the regulator from freezing
B. Maintain sufficient air for a safe exit and unexpected
delays
C. Reduce cylinder weight
D. Prevent the PASS alarm from activating
Rationale: Air management must account for the time and air
required to exit, including unforeseen complications.
4. SCBA Facepiece Seal
Which condition is most likely to compromise an SCBA
facepiece seal?
A. A properly fitted hood
B. Clean-shaven skin
C. Facial hair in the sealing area
D. Correctly adjusted straps
Rationale: Facial hair or other obstructions in the sealing
surface can prevent an effective facepiece seal.
,5. PASS Device
A PASS device activates while a firefighter is operating inside
a structure. The firefighter should first:
A. Ignore it because it may be accidental
B. Remove the SCBA
C. Check the firefighter's condition and determine whether
assistance is needed
D. Shut off the cylinder
Rationale: An activated PASS alarm may indicate firefighter
distress or incapacitation and requires immediate
investigation.
6. Hose Line Selection
The primary factor when selecting a fire attack hoseline is:
A. The color of the hose
B. The age of the hose
C. The required flow and operational objective
D. The brand of nozzle
Rationale: Hose selection must support the required fire flow
and tactical assignment.
7. Hose Deployment
When deploying a charged hoseline, the firefighter should
avoid:
, A. Maintaining communication with the nozzle firefighter
B. Advancing toward the fire area
C. Creating unnecessary sharp bends or kinks in the hose
D. Maintaining adequate hose supply
Rationale: Kinks and sharp bends restrict water flow and
increase friction loss.
8. Nozzle Position
When advancing a handline toward a room containing visible
fire, the nozzle firefighter should generally:
A. Point the nozzle directly at the ceiling only
B. Apply water using the appropriate stream pattern and
movement for the fire conditions
C. Close the nozzle before entering the room
D. Direct all water toward the floor
Rationale: Effective nozzle technique depends on fire location,
compartment conditions, and the tactical objective.
9. Charged Hoseline Movement
Two firefighters are advancing a charged hoseline through a
doorway. The firefighter assisting the nozzle operator should
primarily:
A. Walk ahead of the nozzle
B. Help manage hose movement and reduce friction at
obstacles
Examination Questions with Answers
and Rationales
1. PPE Inspection
Before entering a structure fire, a firefighter discovers a small
tear in the outer shell of the turnout coat. What is the best
action?
A. Cover the tear with duct tape
B. Wear the coat only for exterior operations
C. Remove the damaged coat from service and report it
D. Continue using it if the thermal liner is intact
Rationale: Damaged protective clothing may compromise
firefighter protection and should be removed from service
according to department procedures.
2. SCBA Donning
When donning an SCBA under emergency conditions, the
firefighter's first priority is to:
A. Open the cylinder valve
B. Adjust the shoulder straps
C. Ensure the facepiece is properly positioned and obtain an
effective seal
D. Activate the PASS device
,Rationale: A proper facepiece seal is essential for respiratory
protection in an immediately dangerous atmosphere.
3. SCBA Air Management
A firefighter operating inside a structure should begin
withdrawing before the SCBA cylinder reaches empty. The
primary reason is to:
A. Prevent the regulator from freezing
B. Maintain sufficient air for a safe exit and unexpected
delays
C. Reduce cylinder weight
D. Prevent the PASS alarm from activating
Rationale: Air management must account for the time and air
required to exit, including unforeseen complications.
4. SCBA Facepiece Seal
Which condition is most likely to compromise an SCBA
facepiece seal?
A. A properly fitted hood
B. Clean-shaven skin
C. Facial hair in the sealing area
D. Correctly adjusted straps
Rationale: Facial hair or other obstructions in the sealing
surface can prevent an effective facepiece seal.
,5. PASS Device
A PASS device activates while a firefighter is operating inside
a structure. The firefighter should first:
A. Ignore it because it may be accidental
B. Remove the SCBA
C. Check the firefighter's condition and determine whether
assistance is needed
D. Shut off the cylinder
Rationale: An activated PASS alarm may indicate firefighter
distress or incapacitation and requires immediate
investigation.
6. Hose Line Selection
The primary factor when selecting a fire attack hoseline is:
A. The color of the hose
B. The age of the hose
C. The required flow and operational objective
D. The brand of nozzle
Rationale: Hose selection must support the required fire flow
and tactical assignment.
7. Hose Deployment
When deploying a charged hoseline, the firefighter should
avoid:
, A. Maintaining communication with the nozzle firefighter
B. Advancing toward the fire area
C. Creating unnecessary sharp bends or kinks in the hose
D. Maintaining adequate hose supply
Rationale: Kinks and sharp bends restrict water flow and
increase friction loss.
8. Nozzle Position
When advancing a handline toward a room containing visible
fire, the nozzle firefighter should generally:
A. Point the nozzle directly at the ceiling only
B. Apply water using the appropriate stream pattern and
movement for the fire conditions
C. Close the nozzle before entering the room
D. Direct all water toward the floor
Rationale: Effective nozzle technique depends on fire location,
compartment conditions, and the tactical objective.
9. Charged Hoseline Movement
Two firefighters are advancing a charged hoseline through a
doorway. The firefighter assisting the nozzle operator should
primarily:
A. Walk ahead of the nozzle
B. Help manage hose movement and reduce friction at
obstacles
